so IF

[thesignworks]

Is it worth it?
i can buy a 310 for cheap
and some 11.1 ripcentre
the hasp is there BUT no program
is the juice worth the squeeze. ?

can you refill them yourself 831 and swap the chips with the east end stuff
?
thanks

 

[balstestrat]

You really wanna buy it to run after-market ink?
Why not just some more generic solvent?

 

[thesignworks]

Its cheaper to do than a dx7 equipped solvent though is it not?
the chips are 10 bucks each - -single squirt non arc
the ink is the same money
the printers are more availble.

 

[Boudica]

Its cheaper to do than a dx7 equipped solvent though is it not?
the chips are 10 bucks each - -single squirt non arc
the ink is the same money
the printers are more availble.

Gambling risks having production halted and dead in the water. How much cheaper is it when you can't produce the product?

 

[thesignworks]

more importantly if you fina an old 310 54 incher, what version of onyx will run it?
is it version 11.1
version 11 being the series 2 printers?
or do you need version 12 to run the 310 or the 360

 

[balstestrat]

Pretty sure 11 will run it. I could check later but if you find that you should also find the driver..