Search results

Your T axis is out of alignment.

Got it. Yeah, i-cut was my father's invention and product before he sold it to Esko/Kongsberg. What compensation mode are you running? It looks like you have something going on with compensation and it's throwing off the scale.

By i-cutting you mean run with registration or?

Out of curiosity, why SVG and not PDF?

I don't have personal experience with them other than Vanguard used to print samples for me for trade shows. But the customers I have that have purchased Vanguard have always been happy with them. Also, to add to 10sacer's comment, the little bit I knew David he always took pride in his...

I would suggest take a look at a Nilfisk or Dustcontrol. Both manufactures produce vacuums that have been used on Zund, Kongsberg, and MCTs. It will do the job but expect to spend around 2K. I may still have a contact at Dustcontrol and can pass along if I can find it. I used to purchase and...

Couple questions? Have you updated the spindle drive software since the upgrade. Is the spindle chilled? If so, have you confirmed you are getting flow? It sounds like the drive is going in to an error state. Depending on the drive you may be able to monitor your screen or plug straight into...

We sell something similar called VTXtra Premium Grip. It's a sacrificial that has grippy rubber face and is perforated to allow vacuum. We don't sell much to CNC shops. More to flatbed cutters but if you would want to try a sample and let us know your feedback how it compares would be great.

Ah, I see pdf works fine. I don't know optiscout too well but is there an offset on import OXF option. I know usually there are settings for each file format such as mirror or rotate as well as offset. For example if you are running a corrugated job you would want an offset when reading edges so...

What happens when you output to another file format like dxf or PDF?

Forgot to add, that thin stick with a 2mm to max 4mm cutting edge diameter bit.

Is the aluminum shifting side to side or is it getting chewed up? If shifting then you need a grip style material. Ours is called VTX Premium Grip. If chewed up the I suggest the below options; Try a down cut. When you get to such a thin aluminum, it's going to want to lift and this is going...

I would check out Cutworx. Solid machine. Also, can't go wrong with Laguna.

Does is slide without binding? If it binds try removing the foot and see if the actuator and guide rods slide freely. If removing the foot allow it to travel freely then one of the rods has a slide bend. You can either try to replace the rod or you can put the foot back on but leave it...

Not sure of what your budget is but many of my customers and shops I have visited run AGL. Factory is not too far from me either though never been. I believe they are on the pricey side though.

Its going to be media and print method dependent. A screen print on vinyl with no bleed will require the highest number of marks where a simple geometric shapes direct printed on a stable media like sintra would need less. Always err on more marks and just delete the ones from the the...