• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

#roland

  1. Question Pinch Scan motor error 0080

    Hi Everyone, I'm new to this site and this is my first post. Hoping someone on here can help me out My Roland VS-640 machine has malfunctioned due to the negligence of one of the staff. He failed to properly align a pinch roller before powering up the machine, this resulted in the carriage...
  2. Need Help Caldera profile for Roland VP-540i

    Does anybody know where to find a quality icc profile that works with Caldera V12 for the Roland VP-540i? I have looked at Caldera, Roland, 3M and Avery, but can't find a profile that works anywhere. My machine is just a glorified cutter at this point. _Andy
  3. WTB flexisign pro that will use plotter Roland VS-300I

    I am getting back into doing Signs and graphics and have version 8.6 but does not have my new plotter listed, Roland VS-300I. Not to happy about the cloud based monthly fee. Thank you for taking the time to look at my post.
  4. Mimaki CJV150. Do I need 2 of each Cartridge to run 2x (Dual) CMYK?

    Hi guys. So I had my Mimaki CJV150-75 for nearly a month now. At the time the tech guy told me that I only need 4 Cartridges (CMYK) to run in dual CMYK setup. At the moment I only have 4 cartridges in and the nozzle tests do show a dual CMYK print. The tech guy said putting in 2 of each colour...
  5. Nesting different Print and Cut Jobs Rasterlink 6??

    Apparently there isn't a way to nest print and cut jobs with Rasterlink 6 :( I mean this is such a simple function that I use all the time with Versaworks. Is this true or is there a way round it? Basically I need to have several different eps files on a single row to save media. There is only a...
  6. Roland VS-300 ink type change

    Hi I have a Roland VS-300 and when we first got it the dealer absolutely sold us on the CMYKLcLm configuration, but now we see it's not worth it since it's way too expensive and not worth the hassle for the "extra quality", also getting the LcLm cartridges is specially difficult since very very...
  7. Suggestions As of 2019 Should I go for the TruVIS VG series or the VSi Series?

    I am planning on upgrading from my SP540v soon. I want to get either the VS540i or the TruVis VG540. In GBP I can pick up the VG for 1000 pounds (1300 or so dollars) more. So $11,000 VSi vs $12,300 VG. Both are in used condition. I was aware that the VG series was too new at the time and as...
  8. Suggestions sc-540 grinding noise & error 0010 0010

    hello, I need some help! Our sc-540 is making a grinding noise (seemingly coming from the cut cartridge) that grows louder during a print. The printer will sometimes finish the print but other times have the error 0010 0010 and require a reboot with limited initialization to turn back on. I'm...
  9. For Sale ROLAND Camm-1 GR-640 LIKE NEW for sale

    Hi! My name is Laura and long story short of it, I have this beautiful vinyl cutter for sale that has only had about 150 feet of vinyl ever run through it. Why do I have such a massive cutter? Well, I needed a new cutter and my husband decided we should go big...I didn't agree, but here we are...
  10. Roland VG540i Read this before buying

    I just bought a VG 540i a month ago. So far very disappointed. This is the 4th VersaCamm I have owned plus 2 plotters. I have always been very happy with the product. A friend of mine kinda warned me about it, I did not listen. I should have done more research as to my applications. Thought I...
  11. Versaworks Error "The printer and ink type detected differ" Roland SP-540V

    EDIT UPDATE Problem Solved I have an unexpected error message that has appeared out of no where between print jobs. Current Hardware & Software: Roland SP-540V Eco Solvent Max, Firmware 7.4 Versaworks 5 Windows 7 and 10 (Tried different computer but Same Messages) Problem: I lost connection to...
  12. Need Help Cannot connect the PC with Roland SP540V

    Dear All, I have a Roland SP540V that has been working fine with a windows XP computer. When I start the VersaWorks it asks me to insert the IP address. I have been reading your converations here but still cannot do it. I set the IP to 169.254.135.077, Mask: 255.255.0.0 all good so far I Open...
  13. Roland Versacamm VS-540i

    Purchased brand new in April of 2014. Just replaced Wiper & cutting strip. Always ran Roland Inks. Printer is setup as Dual CMYK.Will come with a copy of Roland VersaWorks & extra inks. Test print looks great and photo was taken 8/6/18. Were still using the printer and can setup a time for...
  14. Moving a Roland LEJ 640 ft

    We are in the process of moving and one of the biggest headaches is moving our Flat bed, a Roland LEJ 640ft. We are in Philadelphia and moving about 2 -3 miles Any suggestion on possible movers? Anyone who has moved a flatbed? Or have experienced it would be highly appreciated Thanks
  15. Roland XR-640 For Sale! Will give a good deal if buy Laminator as well

    I'm selling my 2 year Old Roland XR-640 and Kalmistral-1650 Laminator for great Deal! XR-640 $15,500 63' Kamistral Laminator: $6,000 Will sell bundle deal for $20,000 Pick up in Lewisville,Tx 469-556-8688 Jerry_naj@yahoo.com
  16. Need Help Roland VP-540 Printhead Ghosting Issues

    I was away from the printer for a week and came back to these nozzle ghosting issues. I've gone through multiple manual cleanings and even did a head flush with cleaner cartridges. The print heads are about a year old, and were working perfectly last week. The wiper blades seemed to be a bit...
  17. ROLAND Lg Format cutter Camm-1 Pro GX640 Excellent condition

    ROLAND CAMM-1 PRO GX-640 LARGE FORMAT VINYL CUTTER This Roland GX-640 has been well cared for and is in excellent condition! I bought it new and it's just under 2 years old. Original COST: $6,995.00. It's a workhorse (as Rolands are), easy to use, cuts up to an amazing 63", very fast and...
  18. Need Help Roland RF-640 banding problem RARE CASE

    Hello to everyone, this is the first time I am posting on a forum. If I said or done anything wrong, please forgive me. I have a Roland RF 640 with banding problem. The green color is suppose to be smooth, if looked closely there are green and black banding. 20170707_222208.jpg...
  19. Roland SP-540i Printing Short

    Recently my roland has started printing about 1" short on an 8' print. so I get 95" instead of 96". I do some precision jobs so this makes it very hard to be accurate. TWhis has only started recently but I cant seem to find anyone with an answer including their techs. No warranty left so...
  20. Roland VP-540 issue

    I recently started working a small sign shop. When printing anything black there is a shadow of magenta above it and a shadow of cyan below. I figured it was an alignment issue but after printing the alignment test sheet it appears that a chunk of print heads aren't working. (see image) I'm...
Top