• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Adjusting Vacuum pressure for substrate on HP 360 latex

Robert Boyd

New Member
Where do I change this setting. I have been printing some photos
on a fine art paper and sometimes the head strikes the paper
and leaves a mark, but sometimes it prints fine
 

dypinc

New Member
Where do I change this setting. I have been printing some photos
on a fine art paper and sometimes the head strikes the paper
and leaves a mark, but sometimes it prints fine

The easiest way is to do it when it starts printing. Go to adjustments in the print job screen.
 

FrankW

New Member
You can set this settings in the profile you use. So you don't need to do it everytime when starting a print.

When I want to test settings, i clone the profile in the library and modify it.
 

dypinc

New Member
You can set this settings in the profile you use. So you don't need to do it everytime when starting a print.

When I want to test settings, i clone the profile in the library and modify it.

Profile really. Quite confusing

It would be a lot clearer if you used the term Media Preset.
 
Top