I'm new to printing gig, and trying to learn from you guys s much s I can.
I have trouble with black color (bleeds bad when is next to other color).
When printed as a single color (black lettering on white background) I do not have problem above.
It's happening when print mode is higher then FINE 2.
I'm printing on roland sc 500 , using Flexi 8.1
I ran cleaning cycle few times , manually cleaned and inspect head for hair dust etc,
Tried different profiles with out results.
Tried different media (gloss matte , banner ) same thing.
Tried different temperature settings .....No Result.
Test pattern is good (all nozzlee fireing )
Any help or advice is more then welcome .
Thank you for taking time to read this.
D.
I have trouble with black color (bleeds bad when is next to other color).
When printed as a single color (black lettering on white background) I do not have problem above.
It's happening when print mode is higher then FINE 2.
I'm printing on roland sc 500 , using Flexi 8.1
I ran cleaning cycle few times , manually cleaned and inspect head for hair dust etc,
Tried different profiles with out results.
Tried different media (gloss matte , banner ) same thing.
Tried different temperature settings .....No Result.
Test pattern is good (all nozzlee fireing )
Any help or advice is more then welcome .
Thank you for taking time to read this.
D.