L310 print & cut solution

[Vinyldog]

Looking for the best solution for doing print & cut using my HP L310 printer. Flexi-print Premium, Onyx, Caldera or other.
I mainly use Sign-Lab for layout because it’s what I familiar with.

 

[felipedelgado]

Looking for the best solution for doing print & cut using my HP L310 printer. Flexi-print Premium, Onyx, Caldera or other.
I mainly use Sign-Lab for layout because it’s what I familiar with.

I'm using flexi cloud with my hp l310 and graphtec ce-6000 what prints and cuts very well, but I notice that flexi has lot of "no responding" for moments and usually works in a while.

 

[deand_sai]

Be sure you are using the very latest drivers

I'm using flexi cloud with my hp l310 and graphtec ce-6000 what prints and cuts very well, but I notice that flexi has lot of "no responding" for moments and usually works in a while.

There is an update for the HP Latex drivers in Flexi, which you should get.

If you are using Flexi 11 SP6, get the new drivers here:
http://www.thinksai.com/drivers/

If you are using the HP Latex-branded Flexi (Flexi Basic, Premium or SIGN-Pro HP Latex Edition) get the update here:
http://www.thinksai.com/update

 

[deand_sai]

Looking for the best solution for doing print & cut using my HP L310 printer. Flexi-print Premium, Onyx, Caldera or other.
I mainly use Sign-Lab for layout because it’s what I familiar with.

Speaking for Flexi, it includes tools to make adding cut paths to images very easy. The cut path setup, job print and cut are fully integrated in Flexi which means less steps from start to finish.

Here's a short video that shows this in action:

https://youtu.be/zHp792iNDjE

In regards to price, since your HP 310 came with Flexi Basic Edition, you can upgrade to the full-blown print-and-cut PREMIUM Edition for $995.

 

[Vinyldog]

So is Sai Flexi-print a different version of ScanVec-Amiable Flexi-cut?

 

[AF]

The Summa is practically custom made for dealing with latex prints. Not sure how good the Flexi workflow is with Summa, but the Summa's ship with dedicated software that can be used as a workaround if Flexi has issues. Barcode is what you want.

 

[Vinyldog]

I have not heard of Summa, other than the equipment they make. I'll check that out as well.