I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
where is it leaking. if it is leaking near the heads/boards, please turn off your machine and unplug it. you could easily fry the machine with a single drip of ink.
im using eco sol max and some time i used solaris but i dont think the ink is the problem because i just start used solaris and this happening for a good while now
Sounds like you may have a wicking problem. This is when the sponge in the captop touches the bottom of the printhead... it "pulls" the ink through the lines all the way to the waste.
How do the captops look? Are they swollen or torn up. Also, the caps may be sitting too "tight" or close to the head. This cap height may need to be adjusted.
definitely. also, if he's turning off the machine, but doing a head soak to compensate for the printer being powered down, that can cause a siphon if the conditions are right.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.