heyskull
New Member
I posted this issue a while back regarding how my printer is laying down colours.
Over the last few months I have had one magenta nozzle deflected.
After it blocked completeley last week I carried out a clean and it all came back with no deflections, which was surprissing.
The prints are slightly better but no way as good as when I purchased the machine.
I am currently running Nazdar inks and have used another third party ink for a few months both had this issue.
Is this an ongoing issue with third party inks at the present or is their another issue?
A further point to make is, I believe that it is the Yellow ink that is causing this problem when mixed with either Cyan or Magenta.
Although it is when Magenta and Yellow are mixed the issue is most prominent.
Is it time to swap back to OEM Roland Inks as I have seen re-occuring issues with similar problems on other peoples printers.
I feel that this is an industry wide problem which is due to sub-standard inks.
SC
Over the last few months I have had one magenta nozzle deflected.
After it blocked completeley last week I carried out a clean and it all came back with no deflections, which was surprissing.
The prints are slightly better but no way as good as when I purchased the machine.
I am currently running Nazdar inks and have used another third party ink for a few months both had this issue.
Is this an ongoing issue with third party inks at the present or is their another issue?
A further point to make is, I believe that it is the Yellow ink that is causing this problem when mixed with either Cyan or Magenta.
Although it is when Magenta and Yellow are mixed the issue is most prominent.
Is it time to swap back to OEM Roland Inks as I have seen re-occuring issues with similar problems on other peoples printers.
I feel that this is an industry wide problem which is due to sub-standard inks.
SC