I wanted to reach out & see if anyone had any problems with UV printed products making them sick. We bought a new Roland LEF 300 back in November & we just started our first major production run. We are using ther Eco UV 4 Ink. We have the printer setup with a BOFA Filter that gets vented outside. The finish products are literately making me & my staff sick. When we first started using the printer making a few items a week it was fine. Now that we are ramping up the overall smell from the products is horrible, they smell of straight chemicals. We have products that still smell weeks later. We have had customers complain & return several items. We stopped shipping products and removed all products from our Office & have them sealed up in our warehouse.
Has anyone else had an issue like this ?? I seen a few post from 2015-16 about this same topic.
We are printing on Baltic Birch Plywood & Painted MDF Board. We are printing wood textures on them. We contacted our sales rep & he stated hes never seen this problem before & several customers run multiples of these units in small spaces.
Any Help would be Greatly Appreciated
Has anyone else had an issue like this ?? I seen a few post from 2015-16 about this same topic.
We are printing on Baltic Birch Plywood & Painted MDF Board. We are printing wood textures on them. We contacted our sales rep & he stated hes never seen this problem before & several customers run multiples of these units in small spaces.
Any Help would be Greatly Appreciated