ExecuPrintGS
New Member
For the longest time we have used oracal 3651 with 210 lam for vehicle graphics, about 1.5 years ago a rep from one of our suppliers suggested we switch to 3Mij35c as a comparable product, we switched and had a few failures within months. So we switched right back to the 3651, now this winter i have had 4 jobs that i did within the last year return with graphics curling.
I guess I'm curious what everyone on here is using for digitally printed/ laminated graphics, contour cut to be applied to vehicles (not wraps).
What do you guys use day in and day out? What is your "go to".
As far as prep, we use a de-greaser on any areas graphics will be applied followed by 70%IPA (and in the winter ill clean it twice) let the vehicle rest for a bit after cleaning then apply.
Any advice or words of wisdom you guys can send my way, these failures are no only costly but frustrating.
Any advice on what media (print and lam) you guys would suggest along with any prep advice i may be falling short on, is greatly appreciated.
Printers are roland vp540 and mimaki cjv-30 130
Thanks in advance
I guess I'm curious what everyone on here is using for digitally printed/ laminated graphics, contour cut to be applied to vehicles (not wraps).
What do you guys use day in and day out? What is your "go to".
As far as prep, we use a de-greaser on any areas graphics will be applied followed by 70%IPA (and in the winter ill clean it twice) let the vehicle rest for a bit after cleaning then apply.
Any advice or words of wisdom you guys can send my way, these failures are no only costly but frustrating.
Any advice on what media (print and lam) you guys would suggest along with any prep advice i may be falling short on, is greatly appreciated.
Printers are roland vp540 and mimaki cjv-30 130
Thanks in advance