Recent content by danjuan

Thank you. I might try it this way then. I did find a work around I versaworks by extending door one by 50mm, this will then eat into door 2, so if I add a 50mm bleed this will give me the measurement back but instill need the 50mm overlap, so I just double the overlap instead. So If I want...

Hi all I'm having difficulties with tiling in Versaworks. Basically, If I'm wrapping the rear doors of a van, I want the join to be where the doors meet, in order to do this I either need to have media wide enough to cover both doors or I need to join 2 parts up. Let's say the left rear door...

Not quite right but it may have to do if I can't find a better match. Thanks

Just realized the B & L are a different font, see the image. (Sorry forgot to upload it originally)

Thank you Matches perfectly.

Hi I need a little help matching this font? The old sign maker has retired and no longer contactable so help is needed. Thanks

How did you get on with making your table? I'm in the process of doing the same thing and wondered how you got on?

Hi timkaz227 Yes, calibrated the monitor with i1profiler. As far as I'm aware, by selecting Max impact or U.S.Pre-Press you're ignoring the profile you've just created?

Maybe we can help each other profiling our media. OK, when reading the chart in Versaworks you need to print it at 110% i.e. go into Queue A and change the size to 110%. I've also found that you need to hold down the button on the eye one then click measure, strange one I know but it worked...

I doubt you will find one, do you have the tools to make one?

OK So leaving the levels as they were I limited the total ink to 200%, I then created 3600 patches in i1profiler and printed them using density mode, read the patches and created the profile (All done with CMYK). Do I still leave the color management as density, it didn't mention on the video...

OK, so it turns out that it doesn;t matter about using the density control only preset at that stage as they print out exactly the same with using that or any other preset.

Hi Pauly Please see attached my dot plot, what do you think? Also in the linked video here: It mentions to change to the density control only preset under the Quality tab / Color Management in Queue A when printing the patches generated with iProfiler for instance, should you use the...

What does that mean? I'm only just getting started with color. I've been trying for so long and read a lot of posts/articles relating to it then I run out of time and have to move on to.

Hi I'm using 3rd party inks with my Versacamm vs-640i, although prints are ok I find it impossible to match my screen colors. Tools that I have at my disposal: i1pro2 iprofiler, Babelcolor Patch Patchtool (Trial) Coloris (which uses Argyll CMS) I understand I need to limit the...