Recent content by debeer920

Much appreciated!! Would this unit suffice? https://www.oneida-air.com/super-dust-deputy-4-5-inch-deluxe-15-gal-cyclone-separator-kit?gad_source=1&gbraid=0AAAAADzmatoNbGEEkt46wT3taGlgk08j2&gclid=EAIaIQobChMIyvLM3N6-iAMV4VFHAR1royxmEAQYASABEgKevPD_BwE

We just purchased our first CNC Router (Shop Sabre IS408). We are about a week away from having it up and running. The last piece of the puzzle is choosing a dust collector that will get the job done. We will primarily be working with ACM, Acrylic, PVC, Aluminum, EVA foam, and HDU. Rarely do we...

Hey all!!! I'm looking to grow my business and start doing more in house. I do a fair amount of dimensional sign jobs, as well as custom shaped flat signs. My next step is to venture into the lighted sign world (channel letters, push through signs) . At the moment I have to sub out for all...

Thank you for the response! Okay I started rethinking the install to make it as easy as possible, and came the conclusion that maybe aluminum french cleats would work better. What are your thoughts? Also I am very curious about the shoes. I'm not sure I've ever used or seen them unless they go...

Hey everyone I could use some insight on installing a 3'x15'x1.5" HDU Sign to a stucco wall. First should I use a backer on the sign such as .040 aluminum? Second would you glue studs in the back of sign or use anchors such as tapcons to mount it to the wall? The sign will be installed...

Well piecing it was definitely the way. Thank you all so much for your insight! Hard lesson learned

My only concern with the VHB is it leaving a gap between the foam and aluminum

When removing the mask I was doing it 20 minutes after painting. I will reduce the amount of tint on the next one

Okay I guess that’s the route I’m going to take. I’d feel most comfortable using 0.080 or 0.063 aluminum. Should I have it studded or glue straight to face?

Hey guys I could really use one help right now. I have done HDU signs before, I’m having some serious issues with paint blistering when removing paint mask l. I am in the process of finishing 2 6’x8’ signs. In the center of the signs there is a large crest that Im attempting to gold leaf but...

What kind of paints did you use?

I honestly don’t know. But that thought crossed my mind I bought it from Fellers in 54”x10yrd rolls and I don’t think they move a lot of them at my local warehouse. I also noticed that the vinyl had shrunk quite a bit around the edges of the backing paper when I pulled them out of the box.

I’ve had a reoccurring issue with orajet 3105ht in multiple applications with the glue separating from the vinyl. I first noticed that while weeding some print and cut graphics that the glue was actually sticking to my fingers and smearing off the vinyl. I also had graphics fail after several...

Good evening everyone i need a little help with my machine. I have had the machine since which is going on a year. I have never had an issue with the machine until now. It has preformed flawlessly since I have owned it. Great print quality, speed, and color! However, about a week ago I've been...

Customer needs it to be totally white. Sorry forgot to mention that