Recent content by DIGITAL DESIGNS

That was it... The larger tube was clogged, cleaned it out and the spitting box still would not drain. I removed the large tube from the fitting on bottom of printer and it was clogged there as well not allowing it to get air to it to drain. Got it straight. Thanks!

Hey guys I heard some gurgling during a cleaning cycle and have noticed that the rectangular black box (I believe spitting box) is full of ink and has overflowed inside printer. The large clear tube coming from it has no fluid in it. I removed the tube from the black box and the box started to...

Who does everyone use as their general tool & supply supplier? Such as squeeges, knives, magnets, tapes, etc...? Have been using Fellers and they are very pricey. I found one place about a year ago and forgot who it was and they were much cheaper. tia

From what I believe 210 lam is not optically clear. You would want to use an optically clear lam with perf IMO. We always use Clear Focus perfs and lam.

picture attached

I completely understand that things can change over time, but I did just do a reprint panel for a job last week that matched the other panel wonderfully.... It had some of the greens in it as well. I just feel like something has to have changed drastically, like a setting or something, but of...

I am running mutoh inks... Same inks since day 1. I just got off of the phone with Fellers equipment support and he is telling me it is likely the environment (humidity to be exact).... I just dont buy that???

I have also test printed a file that was printed more recently and it is washed as well... So something has changed very recently. I know alot can change in 2 years, but it is doing it in recent files as well

I printed a truck wrap a couple years ago and now doing another and I printed from the same file and the green is now like a chartreuse. Using flexi and a mutoh 1624. Cant figure out what has happeneed??

Working on an estimate and layout for a 38' cigarette powerboat. The boat is 38' long and is 41" tall at its tallest point on the side of the boat. I am questioning should I put a seam in it or not. I have done 21' bass boats with no seams, but am a bit worried about laminating 38'! If...

Hey guys pretty much new to the forums here. We do wraps and signs, but a great deal of our sales are t-shirts as well. I have a school that is interested in having us as their supplier for school spirit wear. They have used an online store in the past. Is there a service out there where I...

The contour cut is off. Most of the time it will read all the marks fine but the cut is still off

Hi I am printing 3M IJ680 and am having a hell of a time getting the contour cut right. I am using a vinyl express Q54 plotter and flexi software. I am all but certain that it is an issue with the media and not equipment. Here are some things I have tried. I am laminating it as well so I have...