Recent content by Dizzy385

Someone else said that too that there is no clamp/way for it to stay tight but it doesn't come with any other part, I've checked the manual and mine looks the same. These photos I took a pic with my phone of my computer.

The drive shaft for my fb500 keeps coming loose , I am able to get it back in the hole at the bottom but as it prints the shaft raises higher and higher until it comes out again. Any thoughts on how to fix it?

It varies ! At first the carriage was moving then squeeking and stopping , now it won't even move past a few inches. I cleaned the rails of all the grease and reapplied and that got rid of the grinding noise but it didn't help with carriage movement. I'm stumped lol my belt tension isn't correct...

Hi, My carriage is getting stuck as it moves and giving me a carriage error. I've removed the lubricant from the rails and reapplied but I can still feel when I move the carriage that it's getting stuck/has resistance. I've cleaned the wheels as well , I don't see any dust stuck anywhere. Any...

I think so too, what do you do to get ride of the static? I have staticide but I've never used it for my flatbed just my Mutoh

I'm printing using photo quality one of my print heads is starting to go bad so I'm going to assume that's why even tho this only happens on this design

This happens whenever I print this file(the fade of color at the top), not sure why and can't figure out how to fix it. I print at the highest quality, material is polystyrene

I haven't and I do tell it the size, it'll print the whole thing it's just that sometimes it doesn't print all colors so it's faded the first inch or two, and then the next print is always fine afterwards

Sometimes my prints fade out at the end of the print, happens randomly usually..anyone know what I can do to fix?

Oh okay, I usually don't run the laminator myself so I wasn't sure! It's not working but thank you, I'll ask my coworker how he does when he gets back

I've tried this but it didn't work

I tried that too , idk what I'm doing wrong geez lol the power is off on front screen and I press pedal and M at same time, also tried pressing M and up arrow. Does it nit calibratie if it doesn't need too? I ended up laminating without doing it and it was fine

How do I calibrate the Kala laminator? I tried pressing foot pedal and M and nothing happened. I made sure foot pedal was turned on

Latex 360 3" spindle

Hi, The gear has fallen off my spindle, the screws are inside the pole. Someone told me to take the silver "pin" out to take it apart but the "pin" is threaded like a screw and has no screw head it's just hallow. Any ideas on how to fix it?