• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Dr_Andriy

  1.

    Lines JV33

    Hi. There are stripes along the movement of the head when printing. There are several nozzles on the test, but it seems that they should not have much effect. I did compensation, but it does not help. When the maps is enlarged (i.e., %) the stripes are even more visible. *On the blue channel in...

  2. mimaki cjv30-130 - changing from 4 to 6 colour help

    How to make a mode of 8 colors if a 4 colors mode now is use? I mean to be able to control each of the 8 colors separately, to be able to apply any color to each line or disable the line?

  3. DX5 two line mergeded

    Hi guys. I have a dx5 print head, it is on a Mimaki JV33 and there is a problem, two yellow and blue lines have merged. What can I do to continue printing?
  4.

    Calibration dx5

    But its only cyan color. I think that if the problem was in the encoder strip, then all the colours would shift. But I will try to clean up.
  5.

    Calibration dx5

    Hello. How can this be fixed? Cyan doubles. Mimaki jv33.
  6.

    Problem with DX5

    I don't think this is the problem. The cap is new, everything is sealed, the pump fill all channels very well. After filling with ink, all lines started printing normal except magenta.
  7.

    Problem with DX5

    Yes, the ink is in the line. ink is pumped through the head.
  8.

    Problem with DX5

    The pump and cap is in good condition. I replaced the ink tubes and did Fill up.
  9.

    Problem with DX5

    I’m checked cable. It is not in perfect condition, but it works. I have already ordered a new cable, I will try to replace it. But I don't think that the problem is in him.
  10.

    Problem with DX5

    Hello everyone. There is a problem with the DX5 head. I recently serviced a Mimaki JV33 owl printer and removed the head for cleaning. Unfortunately, when I collected everything, one channel stopped working. Tried changing dampers, but nothing helps. Is it a problem in the head, or could it be...

  11. ES3 to SS21

    I am its doing on jv33.

  12. FC9000 + Ergosoft PosterPrint v14

    Where can I get a posterprint 14 free?

  13. Cartridges chip

    Has anyone done a cartridge chip patch? Where to get the firmware program? Надіслано із мого iPhone за допомогою Tapatalk
  14.

    JV33 Pump Cleaning Assy

    I am looking pump cleaning assy (part number 38) and a head cover for my JV33 printer. Maybe someone disassembles the printer and has such details?

  15. Photoprint

    Hi guys. I am looking rip Photoprint with license. Maybe who has. Надіслано із мого iPhone за допомогою Tapatalk
See more
Top