I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Thank you for the information and your input. I've done a cap soak for an hour and it seemed to help, so did another for about 3 hours, got a little better and now letting it soak over night. I ordered B/M/C Bordeaux inks from you with overnight shipping, hoping we can get this resolved and...
So another update; I swapped out the dampers from the next channel over and black is printing solid in the new channel, but now my cyan/yellow are broken in the swapped channel. Assuming this means the printhead is fried?
Good morning,
I've been chasing this issue for a bit and seeking a solution. I've changed out 2 sets of dampers for black, 3 different maintenance stations and can't get rid of this issue. No issues ever with any of the other colors, just the black channels.
The most recent maint station is...
Have you tried pulling through with a syringe after the pump? If it's sucking air, you should be able to hear it. The damper could be bad, or just not seated properly as well. Not sure how the 1204 is set up, but my 1604, I can remove the cover above the capping station and I can see the ink...
This is only with the red? I've had this problem before, but with more colors to a print and it was the material being defective (i.e. old, mismanaged, etc).
So here is the deal. I replaced the print head about 3 years ago and haven't had too many problems, until Sat. The black nozzles started with broken lines. It'd print a job great, then the nozzles went away, then it printed one more job and I couldn't get it back. Since then, I've replaced the...
Thanks for the reply Chris. I believe I tried that, but I will certainly give it a shot when I get a chance. Couldn't afford to be down so had to hook up the tried and true XP machine to it.
I noticed that Win7 rips the files faster, but I have a second PC now with Win7 and see if that was...
Thanks for the reply. Yes, same settings as I had in XP. When I bought the machine, it did the same thing in Vista which caused me to downgrade to XP, but then many of the onboard hardware components are not compatible.
I tried all the port settings. <Port9100> and I think MLP1 were the only...
Hey everyone,
We were having problems with XP Pro, so I spoke with Onyx Tech and asked about any known pitfalls of running Postershop on Windows 7.
The machine was upgraded to Windows 7, downloaded the Win7 HASP driver from Onyx, extracted, then installed 7.3.2. Everything went smoothly...
I have a VJ 1604 I bought 2 years ago. Only have had issues with the pinch rollers and just had to replace a printhead. Otherwise I'm very happy with the machine, easy to work on and maintain. The tech guys at Mutoh are top notch. I can't say the same for the tech service company, but...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.