Recent content by Engstrom Graphics

Here are some images (this time I unplugged the USB and just tried WiFi - same result every time).

Summa S3 - been working fine for a few months. All of the sudden - GoSign doesn't see the device. I go to Devices in GoSign - Edit - and both USB and WiFi list the device in the window. I click OK (on either or, I've tried both, unplugged USB, re-connected Wifi from control panel on cutter...

Thank you!!!

Well - added a thicker cleaning swab and taped it up - so far so good. Crazy you have to add something like this to a brand new cutter (which I love by the way - way more accurate than my Roland could ever dream of) - or add a $400 pinch roller just to eliminate this issue. Thanks for all the...

Interesting - initial support told me to increase the vacuum. Ha. My prints are only 30" wide to begin with - I didn't think I needed an added middle pinch roller since I have the smallest version. I do use thick material - and still getting the cuts across unfortunately. Thanks everyone.

It's been a long day and I feel like this is a simple thing but I just cannot find how to increase the vacuum on my S3? It's gotta be in the control panel somewhere - any help? I am still dealing with my blade making a small cut across my prints during initialization on the X axis. Blade is...

Thanks everyone! And holy - $350 for a pinch roller?

I will check for the black nose piece - the default one is silver, correct? I will have to look - thanks! And I will check the plotter settings compared to looking in GoSign - thanks!

I will check the blade - thank you! As far as material buckling - it seems the vacuum is much less on this Summa compared to my roland printer. I use a lot of smaller sheets (30" width by let's say 26" in length) and it's thicker material/lam - so would making the material longer in length add...

Got my brand new S3 running (finally and thanks to many of you for helping!). I am getting some drag cuts across some of my prints - anyone know how to prevent this? They are not deep - but the knife is dragging and making small marks in my print. Using tangential cut/blade. (See pic - marks...

Got it - thanks for all your help! Now that I got it as Kisscut it is matching what I am inputting on the machine as you mentioned. Thanks! This S3 (though not the easiest to setup with my situation) is so much better than my Roland at cutting. Plus I can now print and cut at the same time...

Got it!!!! Last question - I think I was to use kiss cut. Thrucut worked - but setting on summa was 110gf but when it was cutting it was showing 250gf……? If I do kiss cut as the layer will it use the force set on the machine - in this instance 110? Thanks!

Fixed

Fixed

Fixed