I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Hi Guys-
Has anyone out there found a fix for the Mutoh Chips not allowing complete emptying of the 220ml ink cartridges? I have a about 6 of every color half full but can't use. When the chip problem first started I received some new chip card replacements but they still don't allow the...
Old Gerber 2 owner, in fact I still have one. It is definetly BOTH. The wrinkles are from the foil not being tight but the spotty portions (left of the wrinkles) are lack of adhesion. In your case I would make sure your foils are wound tight and try cleaning your vinyl with denatured alcohol...
Hi Joe-
If you happen to be in the market for an Envision 375 or know of anyone who may be - I have 2 of them that I will be putting up for sale next week. Let me know.
I do have a head that fires. I thought the tic tac…lol fuse was the white ceramic but I will look for the other that I understand is tic tac in size not color. I don’t know the difference in the boards but the white ceramic that is about a about a half inch. Now on the hunt for the smaller...
Thank you for your reply. I replaced head, cables, and station and checked the “tic tac” fuse. Fuse is showing good continuity. Does you have any other suggestions I might check? When I replaced the station it filled with ink on cleaning so I would say head is glowing. ♀️
Funny thing...I have been having the same problem on a 1324 this week. I just replaced the head and dampers, ink is flowing but it won't even print a nozzle check. I hope the maintenance station works for me :) Thanks for sharing.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.