Recent content by GraphixUnlimited

SHE IS ALIVE!!!!! after spending a good hour ( with magnification and a bottle of rum ) i was able to find 4 spots that needed attention on the encoder strip... YAY! when in doubt.. clean it twice

hey all, having a wicked lil problem the last few days with my mimaki jv3 all colors are printing fuzzy... this might get long winded but here we go... normally i print in unidirectional, 8 pass and have had great results. I started noticing that the print was becoming fuzzy and almost looked...

voted for ya ( i actually liked yours the best of the 3 finalists anyway )

deal with this from time to time as we still use our original edge ( 16 years old and still running like a top ) we use a heat gun to soften her up and start pulling ... usually leaves next to no glue residue. Then we finish the clean off with Rapid Remover. curious to see pics of this "edge...

:goodpost:

try to work it out with them but ya gotta get a deposit on artwork or any job for that matter and this is why. be professional and charge them an hours worth of artwork as i am assuming thats about all you have into this give or take ( even if its more.. its something and since ya didnt get a...

.. ya know.. after reading thru all of this and talking about this thread over coffee with my partner here, i have changed my tune on this.. i initially was of the opinion to not train my enemy... but in all reality how could i say no to these people in corporate "sign shops" but help out the...

After much thought I am against them for the sole reason below... We were quoting on a rather large job for us of 3 full wraps for a high profile energy drink... we figured we had it in the bag as our pricing was solid, we were using the best material and we dialed in the timelines to their...

wrong choice of vinyl for this job.. use a cast vinyl next time and everytime for vehicle graphics..

looks awesome!!!

hmmm no one wants to do a visit to canada eh... maybe me and sticky signs there will have a meet and greet up here since all you americans cant handle our beer anyways hehehe:Canada 2::toasting:

hey all, thought id share what i did up this morning. was a fun little project that we were presented with on this one. client came to us and basically said... have fun.. yay!!! cant see it very well from the pics but the grey stripe is all done with a stainless steel texture along with all...

This might sound dumb.. but the best way we have found to drum up new biz is to call old biz. We make sure to stay in contact with our current list of clients and make sure they have everything they need and also educate them on other things we do. I dont know how many times ive heard someone...

It sounds like yer heart is in the right place man but this is a TOUGH ASS industry to get involved in and given your lack of current knowledge about.. well ANYTHING, sign or garment based you need to really take a step back. Some good advice has been given... if you are truly serious about...

+1 for that