• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by idydltd

  1. Mimaki CJV150-75 Convert to DTF

    you don't need the cutter head just print without cutting

  2. Mimaki CJV150-75 Convert to DTF

    my CJV150 already has recirculating lines on it, just no software to tell the printer how to lay the ink down

  3. Mimaki CJV150-75 Convert to DTF

    Yeah but the print has to go through a powder / curing machine anyway and you can set the temp yourself on the cjv. If there was a rip software for it yoi could do it easily.

  4. Mimaki CJV150-75 Convert to DTF

    Anyone have any thoughts on converting a CJV150 to a DTF machine? The new Mimaki machine is exactly the same it just has different dampers, I read somewhere there was a guy in the USA doing it.
    • idydltd
    • Thread
    • 150-75 conversion convert dtf dtf printing mimaki
    • Replies: 9
    • Forum: Mimaki

  5. Mimaki CJV150 No Magenta on Right side

    Yeah I think the airflow is ok, engineer said it could be a signal issue, any experience with electrical issues causing this problem? Thanks

  6. Mimaki CJV150 No Magenta on Right side

    Hi, Thanks but I fitted a new head and the cap top is new as well.

  7. Mimaki CJV150 No Magenta on Right side

  8. Mimaki CJV150 No Magenta on Right side

    Hi, Basically I had an issue on my cjv, I lost a couple of channels did the following: New cap New Pump New damper (both colours went into that damper) Got the engineer out discovered there was a small dint on the head Ordered this...
    • idydltd
    • Thread
    • cjv 150-75 mimaki
    • Replies: 6
    • Forum: Mimaki

  9. Mimaki CJV150 station height and cap adjustment help

    I recently installed a new head and dampers. Can't get any ink into the dampers there must be a suction issue. Had a new cap, and pump. I have moved the cap stop and the cap looks like it's stopping in the middle of the head (left to right) Can it be adjusted in the other direction? Really...

  10. CJV 150-160 CAP Adjustment

    any advise on setting the cap? Just got a new head fitted but cant get suction. Dont think I have the cap adjusted right.
  11.

    Need Help 5 year old Mimaki CJV150-130 stopped printing, please help

    did you resolve this? Just fitted a new head and got the same issue

  12. Mimaki CJV 150-75 - Need head fitted no ink coming through dampers

    Thanks, it had a new pump / cap top and now a new head as the engineer found a dint in the previous one. He was too busy to fit so showed me how to do it. I have tightened everything up and cap seems to be aligned. I do think the cap springs are probably quite old seems a bit flimsy. Printer is...

  13. Mimaki CJV 150-75 - Need head fitted no ink coming through dampers

    Hi, I just replaced the head on my Mimaki CJV 150-75 Put 4 new dampers in no ink going into them when doing an ink fill. There is air travelling up the ink lines but its not shooting into the dampers? Any ideas? Thanks, Alex
  14.

    Need Help Mimaki CJV30 - Print head troubleshooting...(solved)

    did you resolve this? Same issue here, no suction on the head
See more
Top