Recent content by JethroMc

We've just had a JV330-160 installed. Running the first proper production on it today. We came from a Seiko ColorPainter M64s, and the two have quite a bit in common. With the ink configuration we chose (CcMmYWKW), the speed isn't as good as the Seiko, but the prints look really good. Main...

Anyone running a Mimaki JV330-160 with Caldera? Where do you find ICC profiles?

We're using Genesis Lustral by Sherwin Williams.

We are getting more and more of a need for painting routed acrylic letters. We've done a bit of it in an inflatable spray booth with mediocre results, and we're in the process of setting up a proper spray booth with a view to improving our output both in volume and quality. What I would like...

Any wrappers / vinyl installers looking for work in Raleigh?

We have an old Graphtec FC 8600-160 and it works just fine with an M1 Mac via Cutting Master. One thing you do have to watch for is that Graphtec does not update Cutting Master as frequently as Adobe updates Illustrator, so Illustrator keeps getting ahead and there can be compatibility issues...

We can do this, but where are you located? Shipping could be the challenge here unless you find someone local.

I sent you a PM with my direct contact details - If you still need a designer I might be able to help.

I can recommend https://www.tensioningsolutions.com/ Simple and very effective (and cost effective) system. Ron & Kathy are a pleasure to work with. Here's an example

Another thing that has caught me out once before is the blade holder not being installed properly after changing a blade. Make sure its seated correctly and tightened.

I realize this doesn't exactly match your example, but these standoffs are great for doing what you're trying to do: https://www.wired4signsusa.com/collections/signage-standoffs

We use Briteline all the time and love it. We use Wrapcast for commercial vehicle wraps and Duration X (2303) for flat surfaces. We also carry their el cheap vinyl (2203) for economy decals and short term signage. We're happy with all of them their place. Briteline Wrapcast has proved to be...

Just a word regarding UV flatbed printing tactile ADA signs, I have done some experiments on our Fluidcolor R84F, and managed to print tactile text a little over 1/32" in height in a single pass using white ink to build up the height quickly and an overcoat of whatever color is needed. (I say...

So we're removing a wrap where the previous installer used 3M primer 94 in a BIG way. It's basically everywhere except in the middle of flat body panels. If they were trying to make sure this wrap never failed, they NAILED it. Now that I have the job of getting this off, it seems less of a...

Up to $20/hr to start with, depending on experience and proficiency. I'm just an employee here, but I'll say one thing about the owner from my own experience, is that he's fair about paying employees what they are worth.