• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by jjwstar

  1. Mimaki Jv3 Motherboard

    i have a working 160sp just need heads. just swap the heads over.
  2. recommendation - anti edge curl media

    for banner stand , to hang on the wall - lay flat so the edge doesnt curl in.
  3. recommendation - anti edge curl media

    looking for recommendation for anti edge curl media similar to POS PRO+ 200 Polyester Film. any particular brand you guys are using?
  4. One-Way Vision Perf

    what about apply it to windows.....dry or wet?
  5. Cutting Strip for FC7000-100 (Vinyl Express Q100)

    how do you replace the cutting strip? on the old fc-3100, we just pull the whole strip held down with adhesive & just replace the a new one. is this the same?
  6. Do we need to replace 2 heads

    what would the procedure be if i just need to do a head wash just the 1 head light cyan / light magenta?
  7. jv3 sp {ROUTINE CLN}

    wow, 45 min? for years it was off. i have set it to 1 hour now. i still dont know when it is activated. 1. while printing? 2. when on? 3. when off?
  8. jv3 sp {ROUTINE CLN}

    What does this command do? for the last 5 years it has been off. i just set it to every 5 hours?
  9. Mimaki JV3 Head Alignment

    where can we get the service manual?
  10. For those that have used Rolle Pro

    omg!!! email me back.... i have one i m not using
  11. Ipad 2 - Anyone running right out to snap this up?

    i m happy with my xoom
  12. Epson GS6000

    what rips are you folks using with the GS?
  13. Mimaki Technitian Wanted

    anyone know of an independent service tech in the california area, orange county to be exact? similar to the one above.
  14. JV3 160-S DIY head replacement not so hard

    good 4 u....i have been wanting to change 1 or maybe 2 heads myself for awhile now. just worry about messing it up. how much did you pay for the head? did you get it through mimaki?
  15. Question about LED's

    so the LED are durable & bright for outdoor channel letters? we have not get good result with LED in the past & have we have put off using LED for years now. it will either get dim within weeks or go off. went back to neon & it was just much cleaner, simpler, bright!!
Top