Recent content by John Thomson

I run my Tjet from Flexisign. I can rip the file in Flexi and send it to you to try........pm me. john

This will be a cut down version of Photoprint that only has drivers for the suppliers printer. You can take these drivers and drop them into Flexisign. This is what I have done with my Chinese printer.. Joh

The issue here is not the rip software drivers.........with this printer you do not send print files directly to the printer ( unless using Maintop rip).......you output as a .prt or .prn file, save to hard drive, then import into the Epson control software (sometimes this has an OEM name)...

I have one of these and it is an excellent printer. The two companies above are actually the same company....just different website. What rip are you using? The supplied Maintop or did you upgrade to the far superior Photoprint ( Flexisign). The Epson control software supplied on disc with...

I have a Tjet 1.6m with DX7 head. After getting it set up correctly with profiles etc. it has not missed a beat in 2 years.......just my experience. john

I would check the cleanliness of the sides of the head as well.........should be kept clean by wiping with a swab soaked in cleaning fluid. John

Sorry to hear of your problems. I do not have uv or flatbed experience but have some with Chinese equipment. Start from the most basic things......test print? Head height? Head voltages correct? Wil be interested to hear how this pans out. John

If your printers calibration is correct bi direction cuts printing time in half. john

My Tjet running great.......fast, fabulous print quality with no issues to report. John

The software that controls the printer only works with win xp.......sometimes called bannerjet or epson or titan. john

Interesting stuff. You do not have any drivers to allow printing direct to the Tjet unless you use Maintop Rip..... the epson printer control software that runs the Tjet is win xp only ( or Win 7 ultimate in XP compatability mode).............. I decided to run mine from a laptop that is used...

I have had my Tjet 1671 for over a year now and I am very happy with it. It is 1.6m single DX7 head. I have imported a laser, sublimation kit etc from China before so knew there would be setup and teething issues mainly because I am not a printer engineer. Yuki at Tec Industry handled the...

Parts/Ink can be sent from China in 4 days via DHL.....parts price lists are available. I do my own repairs /servicing although the Tjet has only needed cleaning and a cap top so far. No service manual was supplied. I bought from Yuki at www.signequ.com manuals/downloads are here...

Yes they now have and supply a good set of Flexi profiles.......,.the supplied software is the Chinese Maintop which comes with profiles........I used Flexi before and wanted to continue to. Yes Photoprint has the colour profiler.....but you can just paste the Tjet drivers into any Flexi And...

you will not be disappointed with it!..........I have had my Tjet for over a year now. After getting it set up and getting a good set of profiles for Flexisign it has been a fantastic machine......even the ink is good and it is $20 a litre. Photoprint is Flexisign RIP........it is an OEM...