• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by kensign

  1. MIMAKI CJV 30 MAINBOARD AND OLD ELECTRONICALLY WORKED PRINTHEAD .

    one set of cmyk test print could be printed kind of almost full if cleaning more times. but will lose other set of cmyk nozzles lines more and totally gone..
  2. MIMAKI CJV 30 MAINBOARD AND OLD ELECTRONICALLY WORKED PRINTHEAD .

    ok, i just put soft extra ring i cut off the soft ink tube to make it extra tigh and hold the nipples under the captop and the blue cap and all connectors , all sealed very tight no air leak, no clogs , Does it mean one tube/ nipple to pump control one set of cmyk?
  3. MIMAKI CJV 30 MAINBOARD AND OLD ELECTRONICALLY WORKED PRINTHEAD .

    Tubes are all unclogged, pump works good too, i took out the pumps and switch one by one to test from different machines and extra new pump , sucks ink cmyk to cap top , but only one side cmyk always missing, other side very clean, waste ink goes to the waste tank very quick, seems other cmyk...
  4. MIMAKI CJV 30 MAINBOARD AND OLD ELECTRONICALLY WORKED PRINTHEAD .

    Thanks ,I put on the new fuse, everything new, dampers, captop, test pump all working . and changed the cable from the printhead to slider board, , but somehow i could only get one side cmyk test print and missing another cmyk test print, tried many times of cleaning filling. ink is flowing to...
  5. MIMAKI CJV 30 MAINBOARD AND OLD ELECTRONICALLY WORKED PRINTHEAD .

    i put the fuse back and start normal. no code
  6. MIMAKI CJV 30 MAINBOARD AND OLD ELECTRONICALLY WORKED PRINTHEAD .

    is it bad it reads 1.3 ohm, and i took it out and turn on machine, lcd say 47v and a code forget the number , i guess it will show something if fuse not there
  7. MIMAKI CJV 30 MAINBOARD AND OLD ELECTRONICALLY WORKED PRINTHEAD .

    how to check or what is the reading , i am not good at the electronics=148882&hash=e6160270b3943329bad6c5a940952b77']Attach files
  8. MIMAKI CJV 30 MAINBOARD AND OLD ELECTRONICALLY WORKED PRINTHEAD .

    i already changed F13 fuse. no burn mark
  9. MIMAKI CJV 30 MAINBOARD AND OLD ELECTRONICALLY WORKED PRINTHEAD .

    Mimaki cjv 30 just put a new print head,it was not used for printing but turns on all time, i have done everything right , changed everything, damper, pump works sucks a lot of ink to captop when filling up or cleaning and shows all colour on captop, i even changed fuse, and none error code at...
  10. Mimaki CJV not printing

    any update
  11. looking for parts for roland sp540v , SP-300 Ink Junction Board LF - W8406050B0

    anyone has it? still looking..
  12. Mimaki jv33 No Vaccum getting no ink

    prime the new print head , flash the head before put it on, check seal captop, the pump, check all the connection under the pump
Top