Recent content by KGraphics

what will I need to do for that?

But will that also solve the feed error?

Main issue I'm having now is that the feed is all messed up. It tries to process and will error out so I can't set to try any additional test prints

VS 540i. Not 100% sure but probably close to 10 years

The bottom right was the first one post-ink pump change, then the 2nd it split and that's when I knew something was wrong

I did wipe that down both front and back along with thr cords but will also detach if I can. I am just nervous about pulling it off or trying to replace it

I wiped down wires but they didn't have much on them, but I will check again. Thanks for the tip

It mainly seems to be in the area around the ink bottle. I cleaned most everything else pretty well and tore apart as mush as I could

Printer not printing correct color. I did a head soak, still test prints come out poorly. Tried to change the cap top and snapped a nipple on the ink pump. Changed the ink pump but forgot to put the top back on the black and while I have cleaned it pretty well the printer now will not do a test...

It's actually for an EMS vehicle, but thanks for that! I have samples printed to bring over today to check

Unfortunately the vehicle is navy, so I am now questioning if he got the code incorrect..:confused:

Hello, I am working with a customer wanting to match the color of their vehicle the best that they can with a reflective medium for lettering so it shows up at night but not as obviously during the day. The color code I was given was 618G. I tried to find a matching pantone but it looks to be...

Nevermind! It now shows ready to print on the side in versaworks too! thank you so much for the help!

I did change the IP to a new number on the printer and in versaworks and it shows "Ready to Print" when in the verify portion but still shows "not connected" on the side in versaworks