Recent content by ktwigger

Looks like that worked! Thank you so much for your time and wisdom. :)

Had 3 printheads with over 5,000mL ink fired, so I'm switching them out now. BRB

Hey all, hoping someone has a solution for this, so far no internet advice has fixed it. We've had no issues for a while. It doesn't seem to be happening on anything else but this material, or maybe it's the dark color? So far I've changed the profile, adjusted the delay and vacuum, printed a...

Agreed. It so happens the signs are 25" tall so in this particular instance it would only be white and I can fit two perfectly side by side. And that's what I thought! I actually feel like laminate can work against you in some instances, we've had signs before where the laminate has peeled...

Hey all, just need a debate I'm having with my coworker cleared up because it seems to me he wants to waste time and resources, but I have been wrong before. I'll keep it short, we have two signs going up soon that will be white cut vinyl on black ACM polymetal. I would like to cut it from our...

My employer panic bought a HP Latex 360 about 3 years ago now. Our other, much better and way easier to use printer went down for like 2 days because of a bad part and by the next week they had bought a used HP Latex 360 from a FedEx for "backup" (which IMO is bullcrap). So rough estimate, the...

Thank you for that, very helpful. Our printer typically gets Pantone colors correct the first time, but should I be worried about that? We use matte laminate on our regular print material and I want to say the colors have always been right with that.

Forgive me guys, I searched through the forums and found individual posts but nothing cohesive on the subject so I just want to make sure I've got my bases covered before we try this... We've got a very particular client who wants to match the plastic panels on a bunch of Ford Transit Medium...

Not sure honestly. I feel like it's possible he didn't realize it was air egress, but he's been in this business for years and years so my boss and I are both wondering how he didn't realize it. It was a fairly large panel to apply, but yeah, not sure.

I would have to agree with you and signheremd on this, when I wet apped with the air egress (small, doable job for one person) I made sure to get all the liquid out, but this install was outsourced to someone because it's massive and history is showing us that his attention to detail leaves a...

Like the title says. Pictures included. The vinyl was installed December 8th (22 days ago) so it isn't an issue of curing/settling. I don't know yet what my installer used to clean the glass and/or if he tried to do a wet app but I figured I'd post this here anyways and see if any experts could...

Yeah it's definitely older than a month but we're still going to see if Grimco will at least send another roll at no cost. We don't print translucent very often.

Just tried it and it looks like you are correct. Thank you! Sucks that I have to buy a new roll...

Hi guys, needing some assistance here. This is the first time we've had this issue but there's wavy areas appearing on our translucent print. We've even printed a similar sign for the same company (only difference was the size) with the same material and settings and had no issue so I'm not sure...

Interesting, I did see that setting on there but didn't try turning it off. I'll give that a try. And honestly LOL at the HP thing. They never are. Not ever.