• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Mantaworld

  1. Best Source For DX4 Heads?

    Hi where in Canada are you?

  2. sp 540 v, versa works 5.1 software

    have a look at this and perhaps give it a try as well.

  3. Question ROLAND VERSACAMM SP 540v - replaced encoder strip.

    If you took the upper and lower plastic protectors off then double check to make sure you have replaced them properly....they do NOT attach to the machine having the ends line up!....they must be staggered. They need to be placed as per the instructions I have included....if you make them the...

  4. Roland SP-540i printhead suggestion

    I have purchased over 25 DX4 Heads from Claraprint in China. Fast delivery and I believe they are currently on sale for $425.00 US each. Not one problem ever!

  5. Need Help Connecting a Roland Sp540v to computer/VersaWorks

    here attached is some additional info if you are still having trouble......works for me every time.

  6. Roland SP540-V Printer parts needed

    Hi, I was able to rebuild mine as it was not completely broken, what exactly is wrong with yours...can you post a photo?
  7.

    Roland SP-540V Parts

    I have bought several from here: https://www.ebay.ie/itm/Roland-Printer-SP-300-SP-540-V-Control-Key-Overlay-Sheet-Panel-21475155-/192840826653 It is a fine product...looks slightly different but very functional...cheers

  8. Problem with new cutting blade sp-540v

    just thought I would see if you have properly installed the blade into the blade holder....you don't simply screw the top cap all the way down...you have to adjust it....have a look at this video here ...

  9. Looking for servo board for Roland sp300v. Also the same as sp540v

    here are a couple of options if you can't find a good used one... https://www.amazon.com/Roland-SP-300V-SP-540V-Servo-7840605600/dp/B089K4V9TN https://www.sign-in-china.com/products/16723/roland_servo_board_maintenance_service.html you can also enter this search into Ebay.com Roland SP-300 /...

  10. Looking for servo board for Roland sp300v. Also the same as sp540v

    Can you post a photo of the board you want?

  11. Parts for an old Roland SC-540

    if something goes wrong with the ones you have ordered...you can also buy them from a variety of sources...down side is you may have to buy 100 pieces... In the search Forums menu bar above...type this in Screws For Dx4 Head Plate scroll down until you find this thread you will see the part...

  12. Parts for an old Roland SC-540

    are you able to post a photo of the screw...and as well can you measure the length in "mm"

  13. sp540 urgent problem, help!!

    Where are you located.. I would be happy to call you with some suggestions if you provide a phone number

  14. Kelowna

    Im in Kamloops...lol
  15.

    Roland SP-540V Heater stopped working

    Has anyone had experience working on the Main board of a Roland SP-540V when the Heater has stopped working? I have a spare Main Board and when I swap it out for a different one, the heater works....put in the original one and no go...so it is definitely something gone on the Main Board. Any...
See more
Top