I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Sure, however the question is what "failure" means. If the damper fails when it's brand new and it's so cheap, it can be replaced easly. The doubt is if can break down the head on the long distance.
Since I changed the first dampers on my 1204, I have always used generic ones. However on this forum I have read many threads where the original ones are recommended. The price difference is remarkable: € 32,00 vs. € 1,20!
Now I wonder if in the long run the generic dampers ruin the head or...
Great! Thank you!
No air bubbles in the lines, everything is perfect sealed as I can see. Yesterday, for sure, I changed all the o-rings attached to the 2-way connectors above the head and cleaned all tubes with cleaning liquid. Dampers and its o-ring are only 3 months old and the the head is...
Many thanks for your reply. Yes, I know there is a jig to adjust the height of the head, however on the service manual there's no indication on how to make it phisically. There is a screw under the orange lever on the right? I didn't see nothing...
I'm facing with a strange problem... The...
I resolved the issue and I post my experience for anyone who can find it useful.
A friend of mine gave me some new orings, so I replaced the old two on both magenta lines. During the operation of ink charging I noticed that in the capping there was only a little quantity of ink, so I decided to...
Can be as you say, but I'm not so sure because after a little ink charge the machine works for hours until pump perform an automatic cleaning. In my opinion is a ink flow related issue.
Both. Unfortunately (or fortunately :-)) I'm living in Italy and can't buy from solventinkjet.com, I buy cheap dampers from digiprint-supplies (€ 2,00 each) and no trouble as far as now. If switiching not help diagnosing, the problem can be actually the old o-rings.
First of all thank you for your reply.
Both, I switched positions and replaced the damper. Can you explain me why switching dampers may be unhelpful diagnosing the issue?
The o ring is the same, not replaced, unfortunately my supplier did not have them and the manifold as I can see is in good...
Hi everyone, I'm facing a very strange issue with my VJ1204. One line of magenta stops working btween a print and another (due to automatic cleaning), not entirely, but approx an half. The only way to restart the line is perform a LittleCharge process, normal or strong cleaning not help. After...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.