Recent content by Plotter-FIX

Hey, may i know how you solved it? we trasportet the machine to our client and after the transport he error appeared. We are far away to check what could be the problem

Hi guys, We’ve been working on refurbishing a Roland VS-540 for three days and have already performed several upgrades and maintenance tasks. Here’s a summary of what’s been done so far: Maintenance and Repairs Performed: Lines and Components Cleaned: Flushed all ink lines. Thoroughly...

The printhead is still causing the same trouble. Do you have any advice? I'm thinking of installing it into a Mutoh printer now, but I don't think that will make much of a difference...

Hi Neil, Could you please provide me with the parameters? I’d be happy to give them a try. We’ve kept the printhead in our JV33 and installed a new one in the CJV30. We refurbish machines and sell them with a warranty here in Germany. Thanks again for your support! Best, David

Hi everyone, I’m encountering an issue with a DX5 printhead, and I hope someone here can help. I’m a service technician and have personally replaced over 100 printheads, so I’m familiar with the process. In this case, I’ve ensured that the new head ID was properly entered each time. I...

I have the service manual.... This problem not mentioned... I am a Mimaki technician....

Hey, would be lovely to get a solution for taht spacific machine:) Thank you nevermind netsol!:)

Hey guys, a Mimaki from one of my clients did not stop heating. The Heater is already turned off totaly in the Menu and the machine is also heating in the standbuy menu. So he and me are scared of to much heat as it is heating up until 76 degree... so he needs to turn of his machine and is not...

How about just the possibility to choose the ink type of sublimation ink? once i called mimaki they told me how to set it back in the mode where i can choose everything....

How about just the possibility to choose the ink type of sublimation ink? once i called mimaki they told me how to set it back in the mode where i can choose everything....

Hello everyone, I'm David, a technician from Germany. I'm currently facing a challenge with a Mimaki JV150 printer that I hope someone here might be able to help with. Here's the situation: The printer was originally set up with an 8-color CMYK configuration. I flushed all the lines manually...

Thx worked! Solventinkjet

Hey! No worries, i know what i do, i am a technican here in germany working everyday at machines, this one just killed my vibes yesterday and i found no infos in my manuals about the CJV150 paramters to change. Best wishes and thanks a lot, i will try it now:) David

I already made the Initial with 1, why making it with 2? Is that for the cjv150? :)

Hey guys, I have bought a cjv150 with a broken epl2 Board so i bought a new one. It came with epl3 start up fw 1.06 which i upgraded to the newest 1.2. After that i upgraded to the cjv300/cjv150 fw. 4.4 what worked. The machine started as cjv300 and Shows a lot of errors because of thinking...