• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by RICHARD SIMMONS

  1.

    How do I get VW job preview to show again? (see pic)

    Re-install ??

  2. HUGE tip for those using the Roland Color System

    Hi guys ! This why I like to visit this page every day ! Now, I have learned something new for me !! Thanks you all !!

  3. Summa D140 and Onyx10 - markers exceed media size error

    Sometimes it happens that the optical reader does not read the mark when the print is on glossy material. I have a D140SE, and when I print glossy, the cutter doesn't read those dots. What I do is cut some small squares in matte black vinyl, and I place them on top of the printed ones. So it...

  4. Discussion Not quite sure how I feel about this....................... ??

    An opinion: Wouldn't it be a good idea to mark with big letters on each post box? I mean, just to see if the postman is not leaving papers in the wrong place !! :p

  5. How to calculate cutting vinyl time and price ??

    Good morning group! Could someone guide me to know how to charge the cutting time on my cutting plotter? For example, if I cut a 1 square meter square with many squares inside, should I charge the same for 1 square meter with 2 squares inside? I appreciate your comments on how to collect the...

  6. Need Help How to calibrate summa d140 head

    Hi ! I had the same problem. I have a D140SE. In fact, I bought the new OPOS reader, but before changing it, I began to move the 2 screws on the front, one to the right, the other to the left, half a turn, a full turn, etc. It is somewhat laborious, but in the end the result was quite...

  7. Buying printhead

    Check on Digiprint supplies !

  8. SUMMA D140SE new optical reader

    Thanks Frank ! Excuse me if I don't understand too much about this, but see the attached photo. There is no "SHIFT" key. Do you mean from the Winplot program?

  9. SUMMA D140SE new optical reader

    Hi Stephen ! Thanks ! I'll try to make a factory default and see the results. By the way I'm printing on a RE640 Roland ecosolvent printer

  10. SUMMA D140SE new optical reader

    It's not cutting in the center. Look the bottom and upper sides

  11. SUMMA D140SE new optical reader

    Yes ! OPOS calibration was made several times. From 5 times, it only pases 2 of them. I changed the 2 outer pinch rollers, the other 2 are in regular condition. I also changed the cutting strip. I know is an old model, but it's the one I have !! :p

  12. SUMMA D140SE new optical reader

    Good morning group! I have a SUMMA cutting plotter, model D140SE from which I bought the optical reader, thinking that was the problem. (spare part No. 399-310C) Since I was going to change it, before changing it, I made some adjustments to the original reader and it began to read the opposition...

  13. Free Stuff For Y'all

    O man !! Thanks a lot for shearing !!

  14. Wall Vinyl Install

    What is so funny ??

  15. Wall Vinyl Install

    Try to make the wall sealed with some type of paint. This will help a lot
See more
Top