Recent content by Rob_maxgrafix

its not a bad machine for the price, there are definitely a few design flaws tho. If you laminate without a sled, and your laminate is wider than your media, the laminate will stick to the rear deck of the machine as it feeds out. That gets to be a headache, I ended up taking the rear deck...

I recently had to re-install wall graphics at a firehouse, customers stated that the wall had been painted 6 weeks prior, (not entirely sure that was true :noway:) but there was still an odor of paint in the room. Sure enough, the corners started peeling. Waited another 8 weeks before trying a...

laminate it.

Got a job to make a couple hundred round city seals to be applied to car and truck doors. need to be printed on a particular gold confetti, this requires a white base print. Printing on a VS-300i, with white ink. The white ink isn't completely opaque in one pass, but with multiple passes, I...

yes you can, see the pdf below

It looks as if the color channels have a gap in them, you can see the image along the tail fin continues at the first color gap, but just the cyan parts of the image. might want to re-run environment adjustment and all the print head adjustments again and see if anything is off. what does your...

Looking for the stand with casters for a GX300 I recently acquired, it came with no stand.

just to cover all bases, are the first two crop marks in line with the cutting strip? if not, then it wont be able to find the marks.

No, wasnt ignoring you, like I said in my first post, Ive noticed when it mis-reads a crop mark, the entire cut is proportionally skewed. this was more of an abrupt, drastic change. Tech came out and it ended up being a bad pinch roller on the left side. Swapped it out, and its been smooth...

thanks for the response guys, gonna have a tech come out and look at it to prove that its just operator error, lol. as for the material, its oralite 5600 (5mil) with 210 lam (2.5mil)

So I was running off a bunch of reflective FD equipment decals on my BN-20, the first half of the job cut dead on. Then it wen downhill fast from there and I cant figure out why. the pictures below show what im talking about, and ive had it before where it mis-reads a crop mark and the whole cut...

looks good! :thumb: side note, good thing "Johnny" dosent work in my area, theres a biz with the same exact name around here except he cleans port-a-johns, lol

my bad, gotta read better. there is no option for turning off the pdf virtual printer. check your devices and printers menu. the pdf printer should come up in the list as an actual printer. if not, check your device manager and see if there's no issue with the drivers.

to my knowledge, I thought that you had to have acrobat pro, not just the reader. that will install the pdf virtual printer.

Yea I learned that one the hard way, the liner actually has a grip like action when it comes in contact with the print. spens_cubbie - I know it sounds dificult but what I learned was you need to keep some tension on the laminate thats not down yet. it will take some practice but once you get...