• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

rydods's latest activity

  • rydods replied to the thread Filemaker and/or SmartSheet Setup Help? Other estimating/management systems?.
    I'm exactly in the same boat and I've actually re-watched the videos and revitalized my interest recently, then started watching FM...
  • rydods reacted to White Haus's post in the thread Filemaker and/or SmartSheet Setup Help? Other estimating/management systems? with Agree Agree.
    Are you saying you regret building your own FM solution? Are you guys still running your operations with a modified version of your FM...
  • rydods reacted to somcalmetim's post in the thread Reflective Pricing with Agree Agree.
    Tru Dat...heavy reflective even wears on your rollers so sometimes you have to do smaller runs to avoid slippage on large cuts... there...
  • rydods replied to the thread Reflective Pricing.
    The other thing to consider when pricing reflective is additional time to weed it. Probably a bit more wear and tear on your plotter...
  •
    rydods replied to the thread Cutting is off slightly.
    This seems to have fixed our issue. Thank you again!
  •
    rydods replied to the thread Cutting is off slightly.
    Thanks so much! I'll definitely try this. I'm not sure why I didn't notice or try this before. I had no idea!
  •
    rydods reacted to signheremd's post in the thread Cutting is off slightly with Informative Informative.
    if you set the print and cut up in Flexi and add the marks, and then print in Versaworks, you put the print in the Graphtec and...
  •
    rydods reacted to ikarasu's post in the thread Cutting is off slightly with Informative Informative.
    Yes, and Onyx and then cutting Master there's an option where you're pretty much reverse printing, so it is reading the reflective...
  •
    rydods reacted to BigNate's post in the thread Cutting is off slightly with Informative Informative.
    Once you have the position figured out so the plotter and the printer at least have a common point of understanding.... you can use the...
  •
    rydods replied to the thread Cutting is off slightly.
    I can imagine the printer and laminator might "stretch" the printed section a bit but how the heck would you adjust for this? Should we...
  •
    rydods replied to the thread Cutting is off slightly.
    We are generating them from FlexiSIgn (Effects/Contour Cut Mark) We then export to Versaworks and print there (profiles are much better...
  •
    rydods replied to the thread Cutting is off slightly.
    Update....So I did a registration mark offset adjustment on just this print and we adjusted it so that the first cut was fairly accurate...
  •
    rydods replied to the thread Cutting is off slightly.
    Yes, we have issues with reflective from time to time but this also happens with regular material as well. For this one, I'll try some...
  •
    rydods replied to the thread Cutting is off slightly.
    Really good question because we recently started per cutting decals. I checked and it is over the cutting strip and in the proper holder.
  •
    rydods replied to the thread Cutting is off slightly.
    Thanks! I will try this.
Show older items
Top