Recent content by Select Bulgaria Service

Why not :))) I have group in FB. Canon Oce Arizona Printers. You are welcome.

This small PCB is the core of the printer. I hear something lile that for first time afyer 15 years with this printers, but who knows. Enjoy if work correctly. You can use this board in another 350, 360 printer. The printer will record the back up from HDD.

Sounds like cable problem or connector. Who knows. Must stop to find a problem. But this is important! The two fans in ballasts must work. The ballast's cost a lot of money.

Now cross the ballast cables and cross also the cables on lamps. The idea is to check the cables. Will need to remove the metal bracket's. One of this two cables is too short. May be you have defective cable. Happens when the printer is old. Mark cables before if the labels missing.

Find Fireware cable and just baypass this in IGUS chain. It is easy. And check the ballasts fans. If lamps starts and during the print stop, check ballast fans and the big cable with blue connectors.

Why you have error "No connection of carriage"?

If this is GT or GL the ballast's are under table in right leg. If this is 350, 360 XT the two ballasts with two control boards are near to power cables 220V under first cover. The ballasts are other side of the big cables with same blue connectors. Cross cables at ballasts also and write what...

If ypu are lucky man the balast will work. Just right ballast fan doesnt work. Cross the ballst cables and check fans for now.

because the problem is not inthe lamp. Check the fans of lamp power supply(balast's).

I saw this many times in different FB printers. You have a problem with head or something around it. Short circuit from time to time around heads. Head, wires, PH board, connections.

The You have to check it first. It is easy. But the reason may be different. Need more info.

Don't talk nonsense. In the last 10 years I have thrown away more degas modules than you have ever seen. Things do not depend on the model of the machine but on the inks in it.

1. All meniscus filters must be 0.22 microns. Not 0.45 and not mixed. 2. The mebiscus vacuum must be measured and adjusted. We have tool for this. To adjust the level is not enough. You can see 12 in UI, but So... 1. All filters must be 0.22 microns. With 0.45 you change the droplet size. Also...

There is procedure and tool to adjust the meniscus vacuum. You have to take a look at the heads surface first and to clean good the heads and head plate. Clean the heads and head plate. If the problem persists: 1. Nozzle test. Is this test clean? 2. Find out which color is the problem by...