Recent content by Shariff

We are having an issue with the cutter where the scanner isn't following the Vertical cut mark (Onxy Fotoba marks - Single Mark and even Double Vertical Mark) Note it is reading and cutting the Horizontal marks perfectly; also note we are in the home decor segment so we print wallpaper on a...

Heya, To anyone using this printer, we are planning on buy it in a few months time; if you'll could provide a review on it with pros and cons it would be very helpful. We will be using it for wall murals/ roll to roll wallpaper ( seamless patterns ) Cheers. below is a link to the printer...

Yes we understand that, the reason why we bring this up is cos we had a 315 and 310... and those printer were like tanks... how many ever times we had media crashes, the ph keep running with no visible color inconsistencies. It was like nothing even happened to them.

we also have another concern, as we using a very similar media with these specfication (20 oz. (457g/m2) Type II), if there is a media crash will the ph get damaged.

We have spoken to Canon about our concerns, and we are using HP wallpaper profiles.

FYI we primially use type 2 fabric back wallcovering, 20 oz. (457g/m2) Type II - (very similar to this)

Thanks a lot for positive reply on Canon Colorado 1650, we have had very very bad experience in HP latex 800w, pattern mismatch put 1 to 2 inches, due to dimension stability had to replace 4000 sqft wallpaper. heard ear full from client. we have printed 150K from past 6 months.. almost 15k...

Hey we have been using the HP Latex 800 and are planning to upgrade to the Canon Colorado 1650, one of our concerns is the price of the print heads. If anyone has changed the print heads recently kindly let us know the price.

Dear Victor, We were fed up with hp latex 800W, due to dimension stability and color consistency , I have seen canon colorado 1650 check the printer speed, dimension stability is awesome, only scared of printed head cost, Please let me know, how much each print head will cost approximate. so...