I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
bots have to be programmed.
bots have to be overseen, sheparded, if you will.
bots take commands like doctrine, they can not be broken.
bots do the same thing over and over again.
Ladies and Gents, I think we have found the bots in our simulated universe.
Need 5000:
Change the settings in Onyx to show file name.
Set up your base print file of 250 (or whatever reasonable number).
Copy that file X times.
Onyx will add the "Copy Tag" File name: XXXXXXX~1, XXXXXXX~2,...XXXXXXX~20
As the prints come out of the machine it will have the file name and...
or you could start labeling them by hand.
Our process we developed was when ever the roll came off the machine, like as a step of "unloading the machine", you would use the caliper to math the remaining media, and that would be labeled on the open roll.
So we could easily check to make sure the...
So you should be able to change it from 1 to 2 to add the Mimaki.
In my experience we have split up our machines by format.
We ran all roll machines from one machine/RIP and all our flatbeds out of another computer/RIP.
We ran a total of 8 machines out of 3 different RIP stations.
I promise the dancer bar will help.
Physics will help pull the material back into place as it telescopes. You'll end up with a roll that might zig and zag a bit but it won't run off the edge of the machine.
The pulley system that the dancer bar helps creates will help work out the stress that...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.