Recent content by spb

both of the printheads (DX4 and DX7) that i bought from sign-in-china had head ranks with QR codes on them.

I don't think i've seen anyone have a bad experience with sign-in-china/sign-in-global. I have read about some bad experiences with other places, though, doing things like selling used or broken printheads

was the damaged one from sign-in-china?

The DX4 lasted at least six months up to when I sold the SP-300V. I also bought a DX7 in November for a VS-300i and it's been working since then, so about four months and counting sign-in-china.com is now sign-in-global.com. It is absolutely a gamble because if you get something and it has an...

how thick and what kind of length? manual or automatic? i wouldn't recommend vevor or harbor freight unless you're going very thin, like 20ga

I have a Roland VS-300i, but I only buy OEM cap tops because I've heard bad things about the generic ones. I have enough headaches without having to worry about whether the head has a good seal to the cap. The places I buy from stock other generic parts like spit pads and cutting strips but not...

real talk though, are you going to update us once you're up and running with the mystery ink for a few months with the clog status?

OP's photo looks like a stripped hex cap screw to me. both the screws holding my printhead to the carriage on my Roland VS-300i were hex cap screws. I didn't know about JIS (Japanese Industry Standard) screws until today

It'll probably be fine but I could never bring myself to take the risk - I've been buying JetBest from Premier Colour for over a year and never had any issues with it, it's always been super solid. A set of six inks (CMYKLcLm) from Premier is $180. it just seems like way too big of a risk for...

There are a bunch of people on here that print white on clear. I'm about to start, I just ordered my first white cartridge. DM me and I'll give you a deal because I'm totally new to this.

usually, companies do not care. but sometimes, they care a LOT: Solo Cup Company Got Artist’s Instagram Nuked for Using Famous Jazz Pattern

where are you buying cap tops without the tubing? every time I buy one it comes with two tubes attached

Try the above with acetone (or solvent ink wash), and if you still can't get it out - find an Allen key that fits the head (but spins freely). Put a drop of epoxy on the tip of the allen wrench and find a way to clamp it into place so the tip contacts the screw head. Let it set for 24 hours. Put...

Contact your local embroidery shop and get some quotes. 90% of our embroidery business is promotional goods for other companies

I bought a new head (FA10030), new damper assembly (1860639), new pump and cap assembly (1862058) and new ink tubes (1588068). I don't think it's the mainboard or the fuses based on that if I disconnect the first printhead FFC (CN1), it boots without the 1A39 error. I found an Epson technician...