I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
My Past Experience
I have had this a few times being the capping not seating on the head sometimes or when its been sitting in hot days.
past methods in fixing (mine)
1. Move heads out of the way of the damper
2. Syringe a bit of cleaner into the caps and watch if it drains (Magenta always...
DX4 Heads Australia
Hi sorry, Im a bit late in replying
I paid 674 AUD but he has jacked them up to 750 AUD I do know him but he trades as possm6 on ebay Brisbane
just checked maybe a bit dearer that is with rank numbers
I had a Similar Problem
I had the same as this after mine sitting idle for a week only on the K though (xc-540) after I put in 5 new heads and I resolved the problem, I turned the main power off wound the head capping down manually folded the pump hoses and pegged them from draining moved the...
Update on progress
Its now up and running perfectly
I replaced L Cyan L Magenta and Black heads I thought I could get by with the rest (see pict above)
I guess when I wound the heads down manualy to replace the caps and clean it when I first got it, it pulled the coating off the head face
as...
Got all my thing in the mail today and started to replace the dampers and the sent the wrong ones, too small and the hose nuts didnt fit either so once I pulled the dampers off took to the head screws and
pulled the head out to flush it with the dampers they supplied with a syringe. the light...
I had the same problem and followed the sheet and kept comming up with the 0101 error it lacks to mention that once the heads touch the capping station there is 2 or 3 more up (on the xc-540 you need to keep pressing the up arrow till it stops beeping) even after the heads touch then...
followup
I cleaned with a swab again last night and a medium clean not much difference from a few days ago (still waiting for the parts to come) the image attached is from the first print test to last night
and you can see my progress I think the black mabee worn out as its the color you use...
Hi Guys and Girls this is my first post so be kind :smile:
I bought a Roland XC-540 that kinda had an accident
poor thing went to an insurance company in 2011 anyway it was auctioned in 2013 Yay I bought it
I knew the heads would be blocked as it was full of ink and the ink cartriges were not...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.