• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by therealboss

  1.

    Need Help Service Call 0002 Roland VG540

    The you for your swift responds, I will go with the servo board to check and report whatever happens thank you very much
  2.

    Need Help Service Call 0002 Roland VG540

    I still get the same error after unpluging all cables. which of the boards is bad the mainboard or the servo board?
  3.

    Need Help Service Call 0002 Roland VG540

    A customer called me this morning to do a regular maintenance on his machine whilst performing a nozzle check, the machine shows scan motor error 002 002 so I checked the slide bearing, after changing the slider bearing, now am facing service call 002. I have changed the flex cable between...
    • therealboss
    • Thread
    • roland vg-540 service call service call 0002
    • Replies: 4
    • Forum: Roland

  4. New Roland VG2 - VG3 - SG2 - SG3 USERS -buyer beware, you cannot fix your own machine.

    I need the peck2 kindly email me with the cost smailamensah@gmail.com

  5. Need Help Roland Peck2

    I know this video mine is VG540 hence not working for me

  6. Need Help Roland Peck2

    I really need Roland Peck2 tool to unlock my TrueVis VG540 service mode. if you have kindly email me on smailamensah@gmail.com thank you

  7. Question about Service note VG-540

    I need the workaround software thanks

  8. Question Mimaki CJV150-75

    I have a mimaki cjv150-75 sitting there idle and would like to convert it to DTF. I need help for the parameters and software to use Thanks in advance

  9. Question Mimaki CJV150-75 Conversion

    I'm willing to spend as long as I will achieve my goals

  10. Question Mimaki CJV150-75 Conversion

    Thanks for the reply I do not have any issues adding the UV lamps and the control but can you recommend any software that can handle the white ink. I'm an enthusiast and I mostly do it for fun but not to save cost

  11. Question Mimaki CJV150-75 Conversion

    I have Mimaki CJV150-75 sitting down idle and I wanted convert it into UV printer with white option any suggestions thank you
    • therealboss
    • Thread
    • mimaki cjv 150 mimaki uv print
    • Replies: 7
    • Forum: Mimaki

  12. Need Help System parameter for Mimaki CJV150-75 needed

    Thanks mate. it working now. I really appreciate

  13. Need Help System parameter for Mimaki CJV150-75 needed

    My Mimaki CJV150-75 is displaying CJV150-130 after mainboard replaced.

  14. Need Help Roland RE640 Feed Motor Error - 00CC-0004.

    I took the head out when installing I brown the fuses after I installed the new fuses and I turned on machine, Suddenly I get an error Feed Motor Error - 00CC-0004. This error only occurs when I insert the fuse

  15. Need Help Feed Motor Error - 00CC-0004 Roland RE 640

    I took the head out when installing I brown the fuses after I installed the new fuses and I turned on machine, Suddenly I get an error Feed Motor Error - 00CC-0004. This error only occurs when I insert the fuse
See more
Top