Recent content by toddlitwiller

After doing the reset and immediately doing the detection there are 0 nozzles out on any of the heads and the print looks great but after the print I get this primer error. Run the diag 88002 and all pass. any thoughts on this? Thanks

I am getting alot of horizontal banding issues. I replaced all print heads and the issue cleared up but only for one day the next morning the issue is back. I can pull the head and give a few good wipes and it clears up pretty good but not like I think it should be. Attached is a droplet check...

I am getting a ton of horizontal banding on the R2000 Plus Nozzle check looks perfect Replaced Impelling encoder strip (no change) but looking for the location or service procedure to check or replace K0Q45-67066 Drive Roller Encoder assy Any Help would be great.Thanks

How do you make varying color swatches in adobe illustrator? I can do it in the rip but would like to be able to in illustrator.

Selling out some inventory. Some of the boxes that look older probably are. The rest of it is all current stock. 15" wide for $2/yard and 24" wide for $4/yard if you take the remainder of the roll. I can convert down however much you want for $10/color. $15 UPS Ground shipping per order anywhere...

Selling out some inventory. Some of the boxes that look older probably are. The rest of it is all current stock. 15" wide for $2/yard and 24" wide for $4/yard if you take the remainder of the roll. I can convert down however much you want for $10/color. $15 UPS Ground shipping per order anywhere...

Rebranded Graphtech Q54 got damaged in shipping. Make an offer on any parts. 270-970-2205

A good cutter that works well. I can test cut your file. I can personally deliver or help arrange a courier. 270-970-2205

4x8 sheet located at 42040. I can assist with freight

3MM matte red/gloss red with a .008" (.2MM) aluminum skin. $40/per sheet 270-970-2205

I have around 5000 12"x18" 3MM ACM blanks. Matte white/gloss white .012" or .3MM skin thickness square corners $1 each or deal if you get a bunch Text me your zip and a quantity to 270-970-2205 and I'll get a freight quote

I have two more of these available

I recently became a Kala dealer. These two Laminators are set up in Owensboro, KY where we took our training on them. The roll to roll is the Mistral 1650 65" and the Flatbed is the AppliKator 3000 which has a 5'x10' working area. They are in perfect condition. Feel free to text or call me with...

Brand new. I have about 100 available. I can offer competitive - free shipping depending on quantity purchased. Todd 270-970-2205

Took it on a trade. Was in an awning shop so I don't think it seen a ton of use. Zip code 42040. I will palettize. Will help arrange shipping at buyers expense. Todd 270-970-2205