I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
I mainly use the plotter for cutting fabric peel stick wallpapers perforated cuts but for some reason it cuts on the y-axis perfectly like how i want it, but on the x-axis it doesn't cut as well so when i try to tear it off the frame i dont get a clean tear.
is there a setting somewhere do...
Hi guy i been selling fabric peel and stick wallpapers with overlaps with the option for customers to double cut for a edge to edge flush seams and im planning to expand and also sell traditional wallpapers where they have to paste the wall.
For this option do i print with overlaps or edge to...
Hello new to caldera i do wallpapers and would like to print the "Panel 1" outside the artwork, on top or below the panels.
I see the option in tile+ that will actually print like "Panel 1" but it actually prints on the artwork.
I saw another option in the print module annotations section but...
Hi guys i mainly just cut wallpaper fabric material on my Summa s2 X/Y square cuts which knife angle would be best for this?
also for some reason when it cuts on X axis sometimes its not cutting as deep and accurately like on the Y axis do i need to like recalibrate?
Tech came back today and swapped out the ducts. printer is now functioning how it should. this time he actually stayed and waited for me to do a couple of prints before he left so far its been working good.
here is the banding lines i was getting and nozzle check . that would go away after a...
okay the tech is done fixing he said he didnt see anything wrong but just changed the pump cap anyways because he felt bad i paid for the one time warranty thing which was 3.8k.
after he left i did some printing printed about 15 ft then noticed banding lines and did a nozzle check and had some...
update:
well I contacted Epson they wanted 3.8k for a flat fee repair based on the symptoms that i told them i had. so asked them if there was any other options and they said yes there is hourly rate for $175 + parts + traveling fees + lodging fees they also said i cant change the options once i...
i usually do the auto media adjustment when i get bandings and the problems is solved. but this looks to be a different problem as it fails the nozzle check after 15-20 ft but does work after i do the light cleaning mode and able to print for a bit before it comes back.
after about 20feet or so of material i start to see some banding and have to do the machine Light cleaning to clear the nozzle and it works again for a bit before i have to repeat the process.
Hello printer is about 2 years old. Print a couple times a week getting some banding now did a nozzle check and some lines were missing did some heavy cleaning and its all good. but now but after a wallpaper printing getting bands again so i check the nozzle and is clogged again so did a light...
Hi guys i have Onyx thrive 19 i print wallpapers and print them as separate files in the tiling option because it just work better for my workflow. now the problem is that the label will always print on the bottom of the sheet and when i manually flip the panels for better colors matching the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.