Recent content by UpriseSupply

To your knowledge, what exactly is that light indicating? I’m wondering if it’s the board failing to initialize, or if the power supply may be fluctuating and affecting the main board.

Ok, so I got another “tested” board that was working in a machine with bad heads prior to being pulled. Plugged it in to mine and tried firing it up and got nothing. I’m starting to lean now towards the main board, because like previously mentioned, the led that lights ups on there, labeled D1...

I’m open to any options as far as something to check if you guys cna point me in the direction to look. I’m hoping it’s as simple as this panel board and not a chain of things being masked. But I’m always up for a good challenge

I purchased from eBay. I just submitted a return for it so hoping that goes smoothly and I can purchase another board and give it a go sooner than later.

Yeah so the board I have was sold as new. But it’s certainly possible it’s a Chinese knockoff. Everything on it looks the identical minus there is no like model code in the top left corner. I just assumed the original was older and maybe some things have changed since then. I guess I’ll have...

So the panel board was actually the first thing I replaced like I said I had read on here that they are prone to failure. I did that before I even got into testing voltages and whatnot. I’m sure it’s completely possible that the new panel board could also be faulty, but I’d sure hope not. And...

Hey guys, so here’s the rundown. Super thankful for any help or opinions offered! Acquired a Roland versacamm VP300 that has been sitting for about a year. Previous owner said that he could not get the machine to power on and has basically given up on it. I recently rebuilt my Ricoh DTG printer...