Search results

Thank you all for the helpimg hand.

Yesterday, I did not mess around with the machine. This morning, switched the machine on, loaded the orajet media,did a test print and the left yellow was there. Did a normal cleaning cicle, test print, and the yellow was full back again. I am printing as normal. There is no reason for what...

I have done it and nothing happened.

It happened suddenly, after printing about one feet. I stopped the machine, did a testprint and the yellow was missing. Iam with this 2 days now.No chance of yellow coming back.

Have to print a job 5x10 feet on Orajet. Did a testprint. All colors and nozzles OK. After printing one feet, the yellow ink is missing in both directions. Did some cleaning, nozzle wash, ink filling. Nothing solves the problem. Yellow is filled, cartridges full, dumper full. No yellow...

Hi, I am interested in the Profile Master How $$$$$$?

Finally, problem solved Friends, I thank you for your input. I was wrestling with this failure for around 3 weeks now. Exchanged everything realted with the ink, dumpers, capping, pump. Nothing changed the bad output on the black. Forgot telling you that I have this Triangle Bulk system...

Thank you, Artbot. I will work on this.

If there is a leak, how can I resolve this?

Hi, After printing a big job (100 x 500 inches), I noticed on the following job that the black head had half of the image lost. I exchanged the dumper, sucked ink through the pump and wasteline, headwash, heavy cleaning. The failure continues. Please see the attached image...

Hi, Maybe you can help me out. Please see my Post of today. Cannot solve me problem alone.

Hi, I am printing on Mactac printvinyl. 3 tiles, 50" inch wide by 100" long. When the printer starts the second tile, it prints without yellow. Stopped the print, 2 min cleaning and continued printing. Nothing happened. Still without yellow. Checked the dumpers, OK. Checked the ink lines...

Jv3-250sp Came back from the SGIA. Talked to Mimaki Stuff and they said this is some kind of comunication error. Like the fire wire cable broken or too long. My cable is realtively new and about 10 foot long. So, what do you think?

Hi, What is this OIL 3 in 1? For lub the Printhead guide.

Cleaned the encoder I cleaned the encoder and the print was OK for 1 job. On the next, the jump to 2-pass happened again. On another job, the machine stopped imaging at the half of the job, like it had finished, did a material feed of about 5 inches, then restarted with 2-pas. I talked to a...

Hi, I am looking also for the service manual for the JV3-250SP. info@printermania.com.br Thanks

:wine-smi:I am printing a 2,3 by 5m piece in 4-pass bi-dir, 360-520 mode. Suddenly, after a print lenght of 40cm, the JV3 jumps to 2-pass mode. I trashed the file and started over again. After a while the machine jumps again to 2-pass. And now prints in stripe mode, light and dark, light and...

We got a new Mimaki JV33 and during first time startup, the machine just recognizes the 2 mag cartridges and does not go on with the filling. We followed the install process as described in the startup procedure, slecting the ink type and the ink config, inserting the startup cartridges and...

We purchased a Mimaki JV33 and assembled it yesterday. We need some help to do the first time setup, since the tech guy is about 800 miles away. So, the machine is assembled. We have to go through the startup process. Is there any special instruction for this procedure?