• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Unplugged cable cards to black and cyan print heads, now won't print?

    I am confident I found the issue with my black and cyan printheads... the print heads work fine... i swapped the magenta cable cards to the cyan and black in turn and the B&C printed so it is not the print heads.... the F2 fuse did burn out (blow)... i followed the problem to the transistors TR...

  3. Unplugged cable cards to black and cyan print heads, now won't print?

    the fuses DO NOT blow... they are intact and not blowing

  4. Unplugged cable cards to black and cyan print heads, now won't print?

    Thank you for the help... i did think of that... the fuses are new and are fine as in they are intact... I did replace them... i learned the same lesson... i totally remove power from any machine i work on usually... i forgot to turn the main off and did the same as you had done, however i have...

  5. Black & Cyan print heads not working... replace fuses and able to pull ink

    100% sure i changed the correct fuses.... the fuses are still intact and are not blowing at all. and I did pull ink through the heads below the capping stations... also the dampers did charge with ink at the same level as the yellow and magenta... the black and cyan just are not printing...

  6. Black & Cyan print heads not working... replace fuses and able to pull ink

    Thank you about the tip on swapping the ribbons... the fuses are fine... everything is working well... the only things not working are the black and cyan print heads... i have pulled ink with a syringe through both heads below the capping stations... the i changed the manifold on the cyan print...

  7. Black & Cyan print heads not working... replace fuses and able to pull ink

    There was no need to sodder on my mainboard.... the tiny rectangular block fuses are seated in cradles on the mainboard already... my VP540 is old however not that old that it still had the main board that required soddering. I am going to try resetting the head rank in service mode.

  8. Unplugged cable cards to black and cyan print heads, now won't print?

    Hello Rolanders.... Well I have replaced all the problem parts i could..... my VP540 prints yellow and magenta.... and also cuts... the issues with my print heads not printing happened right after i had unplugged them. the pump pulls ink through heads and capping station as well as loads the...

  9. Black & Cyan print heads not working... replace fuses and able to pull ink

    Hello out there in Rolandland... I need help, advise.... some kind of life line here. My VP540 is being an ***.... the black and cyan print head are not working the pump is fine... i switched tubes below the capping station to test... I have replaced the 3.15A fuses and the 2A fuse... I was able...

  10. Roland VP540 wastage

    Wastage on a Roland simple solution... possibly Hi ... first thing I thought of is the rollers and media position... are your rollers positioned at the edges of your material or even half on the material (needs perfectly square alignment of your media/vinyl) the printer/cutter will read where...
View older results
Top