• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Flexi updated to 8.1v1.....

    with flexi open click on edit then go to preferences then tools. In that window look on the left side for rip and print, once your in that window uncheck the box that says connent to PM using TCP/IP.

  3. How to add new color profile?

    Hi

  4. How to add new color profile?

    Go into PM and look under 'file' for import preset, that easy

  5. Roland Versacamm Vp540 Service Call 0140

    There is a problem with Thermistor for dryer. Thermistor cable has short circuited or cutline. Check cable connection around Thermistor or Thermistor replacement. That's straight out of the service manual, good luck with that

  6. Ghost image, Image is blurry

    Clean the encoder strip

  7. versaworks problems

    Do you have media loaded? Does it show the width of the material on the screen of the printer?

  8. Pinch roller error on SP 300 V

    Thought so

  9. Pinch roller error on SP 300 V

    Just curious, why are you guys convinced that TNT has the pinch rollers set incorrectly?

  10. Pinch roller error on SP 300 V

    That's the one, the white cable laying down with two clear strips on either side.

  11. Pinch roller error on SP 300 V

    If your pinch rollers are in aligned correctly and you are still getting the error then it's going to be your flex cable.

  12. Holy Crap! Please Help!!

    Main board. Where was the ZAP?

  13. Contour cutting problem with versa works

    You need to change some settings in VW. Click on Edit then Queue 'x' settings, file format, then make 'EPS margin' something bigger than zero. That will fix your problem

  14. Roland sp 300 - fine art prints

    GregT, No, you can not raise the heads on a 300
  15.

    Please Help !!!!! I Lost A Screw!?

    I have one one if you're still looking

  16. SP300 not reading material width

    Yes, the linear control board should have a red light but i am a little confused. What part does the linear control board play during setup?

  17. SP300 not reading material width

    You need a new cut carriage cable which is about $22. You also need two plastic guides that are about $6 each and an hour of your time.

  18. Does anyone have a Scan Motor for a CJ 500?

    Roland will sell to you even if you are not a dealer?

  19. Print Problem - Ink Clogg?

    If it just sucked air then the problem is going to be the capping station. It is not getting a good seal around the head
View older results
Top