Search results

The FK/RK's are similar to Flora's but the XPress are different, totally different. Try to search more and ask more, and also try to get in touch with any rep from them and arrange a demo.

Artbot is right. Looking at the images of your printhead nozzle test I can see that your heads are Ricoh's. I am not sure as well about the latest ink chemistry that CET Color is using, but first you have flush your heads to make sure that the nozzles are not clogged. I would suggest that after...

@Nick, It is just the way the driver is made. It will only skip the blank space if your profile is without white or 6 color only. It does not skip blank space because of the data padding that onyx is sending to the software driver for the white channel. There is no data that is actually sent...

Since pigments on the whites are heavier than the other colors, you need to find for the right compromise. Also take into account the air leakages on the system. The thing that holds the ink is not the vacuum per se but the force induced by the vacuum. To maintain the required force to hold the...

The raster data is very important for accurate print. I suggest for you to open up the shield for the raster strip. If you are facing the printer, on the right side end of the raster strip there is a white sticker. Do the carriage overrun this white sticker and hit the right limit switch...

The printheads mists if the carriage is on standy. You can adjust the misting interval. It is on the System Tab on the System Parameter window. It is set seconds interval. Setting it on a higher value will reduce the accumulation of ink on the printhead nozzle plate. Be aware that when you...

@Nick, I am just a skype away. You can search my username romel.ginandoy, and I will try to help you out with your concerns. Best.

@Artbot, On a 6x10 there is no valve in between the secondary tank and the printhead that could isolate each head if you only wanted a certain head to be primed. This feature is only present on the latest and some of the 4x8 CET with KM heads. By pulling out the ink pump power connection, you...

Hello Nicky, Still here in the US... How are you? Are doing good? Best regards, Ice

How are you Nicky? it's me. Iceman

@Nick, Nice to talk to you over the phone. Anyway, just give us a call on our tech line if you have some more questions. Our techs are more than willing to help. This will help also so that your call will be recorded and be not left unattended. To stay on topic, usually voltages of new heads...

Hello Sean, finally got you in the forums... how's everything? Ice

Rastek H700's afaik were Toshiba CA4's. Water heated with 8 level grey scale. Have worked on the factory that built those.