• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1.

    Need Help Service Call 0002 Roland VG540

    The you for your swift responds, I will go with the servo board to check and report whatever happens thank you very much
  3.

    Need Help Service Call 0002 Roland VG540

    I still get the same error after unpluging all cables. which of the boards is bad the mainboard or the servo board?
  4.

    Need Help Service Call 0002 Roland VG540

    A customer called me this morning to do a regular maintenance on his machine whilst performing a nozzle check, the machine shows scan motor error 002 002 so I checked the slide bearing, after changing the slider bearing, now am facing service call 002. I have changed the flex cable between...
    • therealboss
    • Thread
    • roland vg-540 service call service call 0002
    • Replies: 4
    • Forum: Roland

  5. New Roland VG2 - VG3 - SG2 - SG3 USERS -buyer beware, you cannot fix your own machine.

    I need the peck2 kindly email me with the cost smailamensah@gmail.com

  6. Need Help Roland Peck2

    I know this video mine is VG540 hence not working for me

  7. Need Help Roland Peck2

    I really need Roland Peck2 tool to unlock my TrueVis VG540 service mode. if you have kindly email me on smailamensah@gmail.com thank you

  8. Question about Service note VG-540

    I need the workaround software thanks

  9. Question Mimaki CJV150-75

    I have a mimaki cjv150-75 sitting there idle and would like to convert it to DTF. I need help for the parameters and software to use Thanks in advance

  10. Question Mimaki CJV150-75 Conversion

    I'm willing to spend as long as I will achieve my goals

  11. Question Mimaki CJV150-75 Conversion

    Thanks for the reply I do not have any issues adding the UV lamps and the control but can you recommend any software that can handle the white ink. I'm an enthusiast and I mostly do it for fun but not to save cost

  12. Question Mimaki CJV150-75 Conversion

    I have Mimaki CJV150-75 sitting down idle and I wanted convert it into UV printer with white option any suggestions thank you
    • therealboss
    • Thread
    • mimaki cjv 150 mimaki uv print
    • Replies: 7
    • Forum: Mimaki

  13. Need Help System parameter for Mimaki CJV150-75 needed

    Thanks mate. it working now. I really appreciate

  14. Need Help System parameter for Mimaki CJV150-75 needed

    My Mimaki CJV150-75 is displaying CJV150-130 after mainboard replaced.

  15. Need Help Roland RE640 Feed Motor Error - 00CC-0004.

    I took the head out when installing I brown the fuses after I installed the new fuses and I turned on machine, Suddenly I get an error Feed Motor Error - 00CC-0004. This error only occurs when I insert the fuse

  16. Need Help Feed Motor Error - 00CC-0004 Roland RE 640

    I took the head out when installing I brown the fuses after I installed the new fuses and I turned on machine, Suddenly I get an error Feed Motor Error - 00CC-0004. This error only occurs when I insert the fuse

  17. Need Help Feed Motor Error - 00CC-0004 Roland RE 640

    I took the head out when installing I brown the fuses after I installed the new fuses and I turned on machine, Suddenly I get an error Feed Motor Error - 00CC-0004. This error only occurs when I insert the fuse
Top