-
I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...
Search results
-
can't get job to print
Do you also have it set to print registration marks? -
-
-
-
Rookie question about print speeds on Roland SP-540V
Do you have Flexi? If you have Flexi your print speed with double just by ripping and printing out of it. VersaWorks profiles are set to make everything look the best it possibly can. But sometimes when you print our of Flexi you still get the same great quality (especially on vector images) and... -
Does anyone have a Service manual for a CJ 500?
I have one that I can try to send you, but it is a large file. send me your personal email and I can try and send it to you. Good Luck! -
OOOh noooo
Sometimes after cleaning an encoder strip it will work for a little while and then stop working again. You can always try taking it out and flipping it over. This will only work IF the bottom side of the encoder strip is clean and not damaged. Then you have to go and initialize the linear... -
Serial number on CAMM-1
The serial number is on the side of the machine where the main switch is. There is a small silver sticker and on it has the SN#. Good Luck! -
JV33 inksets SS21 or ES3?
Eco-solvent vs. Solvent? As soon as the ink hits the non earth friendly material it doesn't make much of a difference which one is eco and which one isn't. The Eco-solvent has to be discarded in the same manner the solvent does because it is still considered a solvent. They both last as long as... -
Cutting Magnets on versacamm
This is the EXACT solution. If you call any tech of Rolands they will tell you the same thing. This machine is more then capable of cutting into magnetic material as long as you have a newer 60 degree blade. If you have laminate on the magnetic material as well it may make it a bit harder, but...