Search results

Thank you, I will try these steps and send you the result

Hello, I have a CJV150-160, this morning I printed a file without problem, but after I had a problem, the printing starts perfectly and after 10 seconds it becomes blurred (photo attached). please help me solve this problem. Thank you

Blurry print

Hi Was wondering if someone had icc profiles for CJV150-160. ink conf. is ss21 - CYMK, Rip is Rasterlink6. Thanks

Head installation Thank you, infinitely "shifil, I solved the problem by introducing the reference of the Head ID

Hi VanderJ, how are you? exactly, i see this message every time i boot up ... what is the solution to not having this message ?!!!

Eeprom Good evening everyone, After having changed the print head (original), and the head memory, the machine starts with this message: "HEAD-1.EEPROM CHECK" and then boot normally. Can you please explain to me what does this message? Thank you in advance.

Head unconnected = Head connected FFC broken or poor connection = New FFC An error occurred in head unit memory = ? Turn off the main power, and turn it on a little later = no result If the error occurs again, carry out the followings. 1. Refer to 7.2.3 Electrical Troubleshooting = When we...

after cleaning with a toothbrush, the connector and head with isopropyl alcohol the problem is not solved:banghead::banghead::banghead:

thank you for your reply "SightLine", I will try to implement your recommendations and to transmit the result .. I hope I have not destroyed the mainboard or the cursor. Once again thank you for your help

Thank you for your reply VanderJ .. can you show me how to clean the terminals? in the case of a short circuit in the connection to the print head, what procedure should I do?

thank you "wunder" for your quick reply .. yes I installed the metal pieces

Good Job Thanks

Hello everyone, After having cleaned the head with a syringe, I accidently poured the cleaning fluid on the print head and touched the electronic component and cables .. after reboot the machine, I receives the error code 202 .. I changed the cables but still the same problem .. it do more than...

Thank's

Hi iron, looking at the cleaning cartridge, I note that the date has expired.

Hi, I followed all the cleaning operations, nothing works, looking at the cleaning cartridge (Fill UP Solution), I note that the date has expired.

Hi Mustafa, I'm going crazy, I start printing and here is the result, I think the problem comes from the clapping station, the cleaning liquid is not absorbed. what should I do? I really need your help!!!

Hi, You will find attached the test print, please help me to solve this problem.

we use RasterLinkPro5SG, and we use obeikan canvas.