Search results

Hi, I have a customer who is looking for some laser-engraved circles, about 3.5 x 3.5 inches. I don't have a laser machine, but I want to run this job for my client. Can anyone here recommend a wholesaler, like Signs365, who can handle engraving stock? Thanks!

Hey everyone, I’ve got a customer asking me for a favor, and I could use some guidance, tthey’re looking to install a photo booth in a commercial space like a mall, but this is totally outside my expertise. If you know of any companies that offer these or have any recommendations on where to...

Hi guys! I have a project where I need to install banners to fully cover two columns; one is 12 ft tall, and the other is 25 ft tall, both with a 96" diameter. Drilling screws is NOT an option. I was thinking of creating a bracket using something like a hose clamp, but I’m not sure if they even...

Hey everyone, I need some advice on hanging a reverse-printed 3/16" clear acrylic sign with a white flood (I'll be outsourcing it from Signs 365). The customer doesn't want to use standoffs, so I was considering VHB tape, but Signs 365 advises against it since it could damage the print. My...

Hey everyone! I could use some advice; I need to price a printed wrap for this vehicle, but I’ve never wrapped one before, so I’m a bit unsure about the pricing. It doesn’t look like it’ll take a ton of material, but the labor is what concerns me. I want to give my client a fair price while...

Hi guys, I have a customer with some permanent vinyl. They don't know if it was Avery 2903 or IJ35 that was installed on the floor a few years ago. Now they need to remove it. The question is, what is the best option to do so, and how could it affect the flooring if any chemicals are used...

Hi everyone, I have a 50-ft banner to hang from the top using grommets and carabiners. The client is concerned about the bottom moving too much, even though it will be installed indoors. Unfortunately, there's no place to secure it at the bottom. I’m considering adding a steel rod at the bottom...

Hi guys! I recently wrapped an entire van, and less than a month later, it started failing in some areas. Some spots are flat, while others are in the recessed sections. The application process was the same throughout, and the other side is perfect. I cleaned the surface with alcohol, the...

Hi everyone, I have an upcoming job for a box truck, but it won’t fit in my garage. I understand this isn’t the ideal scenario, so I’m wondering if it’s worth trying or if it would be better to pass on the job. If it is doable, any tips would be greatly appreciated! Thanks!

Looking for someone who can handle a rush order for me. It's a set of letters and a logo made from 1/4" or 3/16" brushed aluminum or 304 stainless steel. I know Gemini can make them, but my client has an event on Tuesday, which is why we're urgently trying to get it done. Thanks.

Hi guys! We print using the Avery 1105 & 1360 kit, installed on an F350 Heavy Duty. Everything seems fine, but the "Super Duty" letters keep lifting. I’m not an installer myself, but the person who did the installation said it was normal and that with heat and some poking, the vinyl should be...

Hi guys! Have anyone of you used STS inks, If so, is it worth it? It is for a Latex 570 Thanks https://www.stsinks.com/.../replacement-bag-for-hewlett.../

Hi Guys! I will try to make this super short. I have a client that wants their logo on an awning, as per the landlord, we can't paint the awning without approval or paying for a new one, client just want to add a logo in vinyl, seems that someone told them it was possible with no issues, I...

Hello there, long story short. After having some issues with Onyx (I lost the installation disc with the printers install files) I decided to give it a shot to Flexi. I installed and I've been able to print some test, but I have no idea how to calibrate the colors, right now prints are really...

Hello, Looking for a graphic designer with experience in car wrap, walls ans signs in general, a huge plus if knows how to install. Job location in in north New Jersey

Looking for an used, good working condition 54" or wider laminator. I'm in NJ, willing to puck up in PA, NY, CT thanks!

Hey guys Long story short; during the moving I lost the onyx 12 usb with the rip, I've found the key and I managed to download the rip, but I don't have the print installation file for HP latex 570, does anyone in here have it and would like to share it with me? I really don't want to buy...