Search results

See where I can get help with this first. I haven't printed roll to roll yet and I've got a decent size job I can do this with. However I'm really not even sure how to set this up in onyx. Do I have to layout my sheet in layout tool or illustrator and then just set that file with however many...

I've had my Epson S40600 for about 3 months now and it's great! love the thing. It's fast and the quality is great. One thing I have noticed is the ink use is a little odd, not sure if it's this way for others. I've replaced 3 of the 4 cartridges since installing it. (Black, Magenta and Yellow)...

I've been struggling with cutting techniques and one thing I'm having trouble with is Onyx cut server. Now I want to do a Contour Cut and then a Flex Cut in one pass. (Not sure this is possible) In any case if I layer my file with Flex Cut on bottom and Contour Cut on top when I print it to the...

Since I'm having cutting issues and I need to cut on my SP-540V. I want to print jobs on my Epson and then cut them on my Roland. I can print the marks but I cannot get them to read and also anyone have insight into the settings for perf cutting in Onyx. It's a bit different than going through...

I had recently bought a Summa D140 and I've been less than pleased with it. I was told I wouldn't have any problems doing die cut stickers on it but after using for a couple of months it's just been terrible for this. I've had to reprint and throw away more material than I should be, which has...

I'm trying to narrow down my cutting issues and doing different tests. I sent a cut file from Onyx Cut Server to my Summa D140 and it started the cuts but only did half of the job. I normally use the barcode server and just load up all my jobs and that works fine. Not sure why it would just cut...

Either I'm missing something huge or this cutter is a POS. Cut fine the other day, came in yesterday and went to cut a job, I tested to make sure my pressure and depth was still good. Cut the job and weeding the excess didn't come up smooth and had to hold the cut pieces down and pull away the...

Ok I'm in a pinch here. I've got a ton of work and want to utilize my sp-540 for cutting. However I'm printing on my Epson s40600. I cannot figure out how to do cutting the way I did it in Versaworks through Onyx. So my problem is I need a way to get the Roland register marks in Illustrator so...

Sorry for all the threads. I don't have anywhere else to ask for real-world knowledge. I'm printing on RTape metallic vinyl and have OPOS marks for cutting. I did the media calibration since this is very difficult to read. I was able to cut one sheet a couple of days ago, but I'm trying and it...

I've had my cutter running for about a month now. I've had some difficulties but worked through most issues. I'm just wondering about accuracy of cuts and what I can expect. I cutting this piece, which has a very thin border (1mm) and as you can see the cutting is off by about .5mm. I've done...

Found some fonts that were close. Just not the exact match. Thanks

I've had my S40600 running for the last few weeks now and I do love it. It's light years faster than my Roland and the colors are much more vibrant. However I'm still on a heck of a learning curve with this. Since all the virus stuff happened as I took delivery I never had a tech come up and do...

Probably something so common but I cannot figure out what this one is. Thanks!

I'm having a real hard to getting anything to print. I'm very green to Onyx. I installed it yesterday and setup the the printer, Roland SP-540V. The ip tests ok. When I send a job it will say Processing... on the Roland machine but then it go away and never prints and the file gets hung up in...

Can't seem to figure this one out. Fonts are the bane of my existence! Thanks!

I just received my Summa D140 and I'm in the middle of just setting it up and learning about it. If anyone has some solid resources (not the manual, I've got that), tips and tricks on these I'd be very thankful. Now I've got time as I was just laid-off from my job today. Might think about...

Looking for solvent printable kraft stock that had adhesive backing. Probably a long shot but figured I'd ask. Thanks

I do small quantity labels for jars and such. Some people request perforated labels that can be torn when the jar opens. I did some with my normal vinyl (3.4mil) and overlam (3mil) and it's rather thick, but I feel like the vinyl itself is a bit thin. Any recommendations on materials or...

Not really sure where to post this. I'm looking for someone to help me with a gold metallic ink print on vinyl.

I was doing a job that I don't laminate and printing and cutting in one shot. Without taking the material out of the machine. One side, closest to the home position, is way off in the feed direction and on the other side of the 48" sheet it's in the spot where it should be. Now when I do a...